Allied Telesis NetScreen Routers manual Browse to the router’s management GUI, Log on

Page 13

3.Browse to the router’s management GUI

Browse to 192.168.168.168. If you are using a pop-up blocker, disable it for this address. If you access the Internet through a proxy server, set your browser to bypass the proxy for this address.

The login dialog box opens.

4.Log on

The defaults are

username: admin

password: password

Page 13 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 13

Contents AlliedWareTM OS What information will you find in this document? Related How To NotesWhich products and software version does it apply to? Router NetworkStart How to configure the Allied Telesis routerVPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizardEnter the remote site’s LAN IP address Enter the remote site’s WAN IP addressEnter the shared secret key Check the settingsSpecify Peer IDs Finish the wizard Check the settings againManager Access the Router How to configure the SonicWALL routerConnect a PC to the router Set the PC’s IP addressLog on Browse to the router’s management GUI14 AlliedWare OS How To Note VPNs with SonicWALL routers Change the administrator password Customise the router and set up the networkSet the time zone Choose the type of WAN address Enter the WAN settingsEnter the LAN address Set up the Dhcp serverClick the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peerDefine the address object Open the Custom Address Objects summary22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration WizardsSelect the networks for each end of the LAN Create the Site-to-Site policySpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main ModeIf necessary, restart the router Specify IKE Main ModeCheck the tunnel status How to test the tunnelPing the SonicWALL LAN How to use the CLI instead of the GUI Wizard, for Remote Peer IP