Allied Telesis NetScreen Routers manual Enter the LAN address, Set up the Dhcp server

Page 17

5.Enter the LAN address

Enter the IP address and mask of the SonicWALL’s interface to the LAN.

Then click the Next button.

6.Set up the DHCP server

In this step, you can set up the DHCP server on this router to service the office LAN you intend to connect to. Check that the wizard has chosen an appropriate range of addresses.

Then click the Next button.

Page 17 AlliedWare™ OS How To Note: VPNs with SonicWALL routers

Image 17

Contents AlliedWareTM OS Which products and software version does it apply to? Related How To NotesWhat information will you find in this document? Router NetworkStart How to configure the Allied Telesis routerVPN tunnel 1. Open the Configuration Wizards Name the VPN connection Start the Site-to-Site VPN wizardEnter the remote site’s LAN IP address Enter the remote site’s WAN IP addressEnter the shared secret key Check the settingsSpecify Peer IDs Finish the wizard Check the settings againManager Access the Router How to configure the SonicWALL routerConnect a PC to the router Set the PC’s IP addressLog on Browse to the router’s management GUI14 AlliedWare OS How To Note VPNs with SonicWALL routers Set the time zone Customise the router and set up the networkChange the administrator password Choose the type of WAN address Enter the WAN settingsEnter the LAN address Set up the Dhcp serverClick the Close button Log in again Open the Address Objects summary Define the LAN subnet of the peerDefine the address object Open the Custom Address Objects summary22 AlliedWare OS How To Note VPNs with SonicWALL routers Create the VPN Return to the Configuration WizardsSelect the networks for each end of the LAN Create the Site-to-Site policySpecify security settings 26 AlliedWare OS How To Note VPNs with SonicWALL routers Specify the Local and Peer IKE IDs Set the VPN IKE IDs and use Main ModeIf necessary, restart the router Specify IKE Main ModePing the SonicWALL LAN How to test the tunnelCheck the tunnel status How to use the CLI instead of the GUI Wizard, for Remote Peer IP