Installing Batteries
1
Installing
Batteries
This recorder can be used with either
Ni-MH Rechargeable Battery Pack (included)
1 | Lightly press down on the battery cover |
release button and open the battery |
cover, as shown in the illustration below.
2 Insert the
When pulling on the tape the battery pack may suddenly pop out, so be sure to press down lightly the battery pack with your finger while pulling.
The battery pack needs to be fully charged in the recorder before initial use.
Recharging Battery Pack
The battery indicator on the display changes as the battery pack lose power.
→ 
→
When 
appears on the display, charge the battery pack as soon as possible.
When the battery pack charge is low, the
recorder shuts down and [ 
Battery Low ] appears on the display.
Notes
•Removing the battery pack while the recorder is in use may corrupt the file.
•If power runs out during recording, current file will be lost or corrupted!.
•It is crucial to charge the battery pack once you see one hash mark on the LCD battery indicator.
•Remove the battery pack if you are not going to use the recorder for an extended period of time.
When using the
In addition, when inserting the battery pack, insert them so that the tape is under the battery pack, as shown in the illustration. The battery pack can
14 then be removed easily by pulling up the tape.