Device Lock Function
Unlocking the Recorder Via Fingerprint
Verification (Only
Slide the finger to be scanned for verification over the scanner window on the back side of the recorder in one sweeping motion from top down as shown in the illustration.
If [NG! Sweep Finger Again] is displayed,
Press your finger firmly at the fingerprint sensor, and slide it at a constant speed.
In case the fingerprint may not be scanned correctly, press your finger firmly against the sensor and sweep it.
Authentication Halt Mode
If there is no password match after five tries the recorder will enter password input halt mode for ten minutes.
After ten minutes have passed the mismatch history will be erased and it will once again return to the password input screen.
Fingerprint Registration (Fingerprint)
Fingerprint registration is performed on the recorder. By selecting an Author ID from the Author list (☞ P.46) and then registering your fingerprint, you can associate it to your Author ID. You can register up to 10 fingerprint data.
1 Select [Fingerprint] from the [Device Menu] screen and press OK/MENU or the 9 button.
|
|
| Device Menu |
|
|
| Fingerprint |
|
| ||
| Card Select |
|
| ||
| Beep |
|
| ||
| Format12 |
|
| ||
| USB Class |
|
| ||
| Time & Date |
|
| ||
| BACK | EXIT |
| ||
2 | Press + or – to select [Enroll] and then | ||||
press OK/MENU or the 9 button. | |||||
|
|
|
| ||
| Fingerprint |
|
| ||
| Enroll |
|
| ||
| Verify |
|
|
BACKEXIT
3 Press + or – to select a registration number and then press OK/MENU or the 9 button.
When making a new registration, select a registration number that has not already been registered ( does not appear). When re- registering a fingerprint, select the previously registered number ( does appear).
3
Device Lock
Function
Unlock Device
Enter Password
Device is
Locked
09 : 59
Fingerprint
Data1
JONATHAN
Data2
DS5000ID
Data3
- - - -
BACKEXIT
aConnection with
Author ID
ab No connection with
Author ID
b
43