Olympus DS-5000iD manual Turning on Recorder, Power Save Mode, Power Save Setting Power Save

1

Turning ON

the Recor der/Power Save

Mode

Turning ON the

Recorder

With the battery charged in the recorder and the card inserted properly, the recorder is ready to work.

While the POWER switch on the side of the recorder is in the OFF position, none of the buttons or switch on the recorder will be active. Slide the power switch to the ON position to activate the recorder.

Power Save Mode

When the recorder is ON but not in use for 10 minutes, by default, it will switch to power save mode automatically. To reactivate the recorder again, operate any button or the slide switch.

Power Save Setting (Power Save)

You can set the time to enter Power Save mode from among [5 min.], [10 min.], [30 min.], [1 hour], and [Off] .

To exit power save, press any button. The [Power Save] setting can be changed from the Menu. For more details, refer to “Menu List” (☞ P.35) and “Learning to Use the Menu” (☞ P.39).

Power Save

5min.

10min.

30min.

1hour Off

BACKEXIT