Olympus DS-660 manual Specifications, Technical Assistance Support

Page 55

Specifications

Recording format

DSS (Digital Speech Standard) Input level –70 dBv

Sampling frequency SP mode: 12 kHz LP mode: 8 kHz

Overall frequency response SP mode: 300 to 5,000 Hz LP mode: 300 to 3,000 Hz

Recording time

SP mode: Approx. 5 hours 10 minutes

LP mode: Approx. 11 hours

Alkaline battery life Recording: Approx. 12 hours Playback: Approx. 8 hours

(with alkaline batteries, based on our standard testing procedure)

Speaker

Built-in ø28 mm round dynamic speaker

Microphone jack

ø3.5 mm mini-jack, impedance 2kΩ

Earphone jack

ø3.5 mm mini-jack, impedance 8Ω or more

Maximum working output (3 V DC)

250 mW or more (8 Ω speaker)

Input power requirement

Rated voltage: 3 V

Batteries: Two AAA Alkaline batteries (LR03 or R03)

External power supply: AC adapter

External dimensions

108 x 41.5 x 21 mm (without protrusions)

Weight

75 g (including alkaline batteries)

*Specifications and design are subject to change without notice.

*Battery life varies greatly according to type of batteries used and the conditions of use.

Technical

Assistance And

Support

The following are contact information for technical support for Olympus recorders and software only.

◆ Technical Hotline Number in the U.S. and Canada

1-888-553-4448

	◆ User Support E-mail address in the U.S. and
	Canada	Specifications/Technical
	Luxemburg, Netherlands, Norway,	Specifications/Technical
	distec@olympus.com
	◆ Technical Hotline Number in Europe
	Toll free number
	00800 67 10 83 00
	available for Austria, Belgium, Denmark,
	Finland, France, Germany, Italy,	Assistance
	Portugal, Spain, Sweden, Switzerland,	Assistance
	Portugal, Spain, Sweden, Switzerland,
	United Kingdom
	Charged numbers for the Rest of Europe
	+49 180 567 1083	And
	+49 40 23773 899	And
	◆ User Support E-mail address in Europe	Support
	◆ User Support E-mail address in Europe
	dss.support@olympus-europa.com

55

Image 55

Contents DS-660 USB Microphone General PrecautionsBacklight Backlight Editing File CommentsAC Adapter BatteriesCase Main Features Table of Contents Identification of Parts Display LCD Screen How to Use the ClipInserting Batteries Hold Using the AC AdapterSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderSet the minute Setting Time/Date TIME&DATETime/Date Screen Set the hourChanging the Time/Date New Recording RecordingTo see the remaining recording time Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorOverwrite Recording Insert REC? appears on the display Insert Recording4Press the FF/+ or REW/- button to choose between on and OFF 3Press the REC/SET button. The Vcva setup process beginsStart the recording Adjust the start/stop actuation levelLow High Recording Modes REC Mode Microphone Sensitivity Microphone sensitivity is adjustable to meet recording needsYou can start playing a file at any point 4Adjust the Volume control to your likingRecord/play indicator lamp glows green PlayingPlayback functions Operation How to CancelErasing One File at a Time ErasingPress the FOLDER/MENU button to Choose a folder Folder name is displayed for Erase All Files from a FolderAll files Press the Erase button for Seconds or longerTo Partially Erase a File A S E Noise Cancel Function Locking Files Lock File locking setup process beginsPress the FF/+ or REW/- button to choose between on and OFF Clearing an Index Mark Setting an Index MarkIndex Marks Locating an Index MarkAlarm Playback Function Alarm Accept the minute To enable alarm sound onlyAccept the hour 11 10 to set the minuteAssigning Folder Names FolderName Button Push Action Recorder buttons that are used to input charactersUse the two following methods to quickly find characters Available characters When you have finished setting the folder nameOr longer Input the character File comment setup process beginsThis completes the file comment input procedure Assigning File Comments CommentTime stamp File lengthFile comment Press the FF/+ or REW/- button to choose Start Formatting the Recorder FormatPress and hold the FOLDER/MENU button for 1 second or longer Menu ListOperating Environment Using DSS Player SoftwareAudio I/O terminals Earphone output or speakers IMac/ iBook/ Power Mac G3,G4/ PowerBook G3,G4Computer must support a standard USB port Operating System Mac OS 9.0-9.2.2/10.1-10.2Insert Olympus DSS Player into the CD-ROM drive Installing SoftwareInstallation Language Selection dialog box opens Be sure to confirm the following before installationSelect the recorder you use Authorizing the start of file Setup Status CopyingExit Acrobat Reader setup Currently installed on your PCCompleting setup Select where to install DSS Player for MacSearch by Contents Using Online HelpSearch by Key word Connecting to your PC using the USB cable Connecting to Your PCPlace the recorder on the cradle Connecting to your PC using the cradle5Disconnect the USB cable HookPlayer to reinstate again Manual start Running DSS PlayerDSS Player for Mac folder opens Start your MacintoshDouble-click the DSS Player for Mac folder Double-click DSS PlayerDevice Manager Window Window NamesPlay Control Bar Dictation Folder WindowSelect the voice file Download Voice Files from the RecorderDownload Selected Files Select the folderDownload complete Download Voice Files from the RecorderPlay the voice file Play a Voice FileFile name Message Meaning Explanation Action Alarm Message ListSymptom Probable cause Action TroubleshootingAccessories optional Technical Assistance Support SpecificationsE2-2965-01 Canadian RFI