Olympus DS-660 manual Using the AC Adapter, Setting the Hold switch to the Hold position

Page 9

Using the AC Adapter

Plug the optional AC adapter (Olympus Model A321 or A322) into household power outlet and connect the power plug to the recorder’s power connector (DC 3 V) as shown in the illustration. Always stop recording before connection. Otherwise it may not be possible to play back the voice data being recorded.

Warning

• Always stop recording before connection or disconnection.

•When the AC adapter is not in use, disconnect the power supply plug from the power outlet.

•Use only the correct power supply voltage as indicated on the adapter.

•Do not use the AC adapter when connecting the recorder to the USB port.

Hold

HOLD	Usingthe ACAdapter/Hold

Setting the HOLD switch to the HOLD position.

If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.

Remember to reset the HOLD switch when using the recorder.

Notes

•If you set the recorder to hold during Stop mode, the display goes dark. If you press any button, the time will flash for about 2 seconds, but the function of the button is disabled.

•The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button.

•If you are recording when you switch the recorder to HOLD, recording will continue until the recorder memory runs out.

9

Image 9

Contents DS-660 Backlight Backlight General PrecautionsEditing File Comments USB MicrophoneBatteries AC AdapterCase Main Features Table of Contents Identification of Parts Display LCD Screen How to Use the ClipInserting Batteries Setting the Hold switch to the Hold position Using the AC AdapterRemember to reset the Hold switch when using the recorder HoldTime/Date Screen Setting Time/Date TIME&DATESet the hour Set the minuteChanging the Time/Date New Recording RecordingTo instantly review a recording Quick review Pause RecordingListening While Audio Is Recorded Recording Monitor To see the remaining recording timeOverwrite Recording Insert REC? appears on the display Insert Recording4Press the FF/+ or REW/- button to choose between on and OFF 3Press the REC/SET button. The Vcva setup process beginsAdjust the start/stop actuation level Start the recordingLow High Recording Modes REC Mode Microphone Sensitivity Microphone sensitivity is adjustable to meet recording needsRecord/play indicator lamp glows green 4Adjust the Volume control to your likingPlaying You can start playing a file at any pointPlayback functions Operation How to CancelErasing Erasing One File at a TimePress the FOLDER/MENU button to Choose a folder All files Erase All Files from a FolderPress the Erase button for Seconds or longer Folder name is displayed forTo Partially Erase a File A S E Noise Cancel Function File locking setup process begins Locking Files LockPress the FF/+ or REW/- button to choose between on and OFF Index Marks Setting an Index MarkLocating an Index Mark Clearing an Index MarkAlarm Playback Function Alarm Accept the hour To enable alarm sound only11 10 to set the minute Accept the minuteAssigning Folder Names FolderName Recorder buttons that are used to input characters Button Push ActionUse the two following methods to quickly find characters When you have finished setting the folder name Available charactersOr longer This completes the file comment input procedure File comment setup process beginsAssigning File Comments Comment Input the characterFile length Time stampFile comment Press the FF/+ or REW/- button to choose Start Formatting the Recorder FormatPress and hold the FOLDER/MENU button for 1 second or longer Menu ListOperating Environment Using DSS Player SoftwareComputer must support a standard USB port IMac/ iBook/ Power Mac G3,G4/ PowerBook G3,G4Operating System Mac OS 9.0-9.2.2/10.1-10.2 Audio I/O terminals Earphone output or speakersInstallation Language Selection dialog box opens Installing SoftwareBe sure to confirm the following before installation Insert Olympus DSS Player into the CD-ROM driveExit Acrobat Reader setup Authorizing the start of file Setup Status CopyingCurrently installed on your PC Select the recorder you useCompleting setup Select where to install DSS Player for MacUsing Online Help Search by ContentsSearch by Key word Connecting to your PC using the USB cable Connecting to Your PC5Disconnect the USB cable Connecting to your PC using the cradleHook Place the recorder on the cradlePlayer to reinstate again Manual start Running DSS PlayerDouble-click the DSS Player for Mac folder Start your MacintoshDouble-click DSS Player DSS Player for Mac folder opensPlay Control Bar Window NamesDictation Folder Window Device Manager WindowDownload Selected Files Download Voice Files from the RecorderSelect the folder Select the voice fileDownload complete Download Voice Files from the RecorderPlay a Voice File Play the voice fileFile name Message Meaning Explanation Action Alarm Message ListSymptom Probable cause Action TroubleshootingAccessories optional Technical Assistance Support SpecificationsE2-2965-01 Canadian RFI