Epson GT-5500 manual For United Kingdom Users, Safety information

Page 12

For United Kingdom Users

Safety information

wWarning: This appliance must be earthed. Refer to the rating plate for voltage and check that the appliance voltage corresponds to the supply voltage.

Important: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

Green and yellow — Earth Blue — Neutral

Brown — Live

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol (/).

The blue wire must be connected to the terminal in the plug marked with the letter N.

The brown wire must be connected to the terminal in the plug marked with the letter L.

If damage occurs to the plug, replace the cord set or consult a qualified electrician.

Replace fuses only with a fuse of the correct size and rating.

4Introduction

Image 12
Contents Page Scanner Parts GT-5500 Declaration of Conformity Contents Appendix a Technical Specifications Glossary Index Page Features IntroductionOptions Important Safety Instructions Scsi System Cable 25-pin to 50-pin B860081Scsi Peripheral Cable 50-pin to 50-pin B860091 Introduction Safety information For United Kingdom UsersSetting Up the Scanner Choosing a Place for the Scanner Removing the Transportation Screw Plugging In the Scanner Initialization Connecting the Scanner to Your Computer Understanding Scsi connectionsDaisy Chain Setting the Scsi ID number Scsi CablesPage Do not use an external terminator Connecting the scanner CCautionPower-on sequence Power-off sequence For Windows 95 usersUsing Your Scanner Lights and Buttons Lights Placing a Document on the Scanner Before scanning a documentCorner of the document Removing the Cover for Thick or Large Documents Do not place heavy objects on top of the scannerSizing Up Your System RAM and hard disk sizeAccelerator boards Video cardsMonitors File compression softwareMaintenance and Troubleshooting Maintenance Cleaning the scannerTransporting the Scanner Replacing the fluorescent lampsProblems and Solutions Error indicatorsOperating problems Operate light does not come onReady light does not come on Scanner does not start scanningScanner software does not work properly Quality problems Entire image is distorted or blurredPart of the image is distorted or blurred Edges of the document are not scannedImage is faint or out of focus Image is too darkStraight lines in the image are jagged Image does not look the same as the originalLine of dots is always missing in the scanned image Printed image is larger or smaller than the original size Your image cannot be printed or the printout is garbledTechnical Specifications 2Technical Specifications ScanningElectrical Safety Approvals EnvironmentalScsi Interface Initialization Methods Contacting Customer Support Contacting Customer SupportFor United Kingdom and the Republic of Ireland Users Enquiry DeskCustomer Support For Australian Users Epson FaxbackFor Singapore Users For Hong Kong UsersFor Philippines Users Electronic bulletin board systemGlossary Additive primary colorsESC/I Scsi Threshold Index Index IN-1IN-2 Index Index IN-3 IN-4 Index Epson Overseas Marketing Locations Epson AMERICA, INC