Epson GT-5500 manual Printed image is larger or smaller than the original size

Page 42

Printed colors are different from those in the original image.

Exact reproduction of colors is very difficult. The reason for this is explained in your Color Guide. See your software manual or your printing company for guidance on color matching.

The printed image is larger or smaller than the original size.

The image size settings in your software determine the size of the printed image. Do not use the size of the image on your monitor to judge the printed size.

Your image cannot be printed or the printout is garbled.

Check that the printer is properly connected with the computer and is correctly set up. (See your printer manual.)

Check that your software is properly installed and set up for your printer. (See your software manual.)

3-10Maintenance and Troubleshooting

Image 42

Contents Page Scanner Parts GT-5500 Declaration of Conformity Contents Appendix a Technical Specifications Glossary Index Page Features IntroductionOptions Important Safety Instructions Scsi System Cable 25-pin to 50-pin B860081Scsi Peripheral Cable 50-pin to 50-pin B860091 Introduction Safety information For United Kingdom UsersSetting Up the Scanner Choosing a Place for the Scanner Removing the Transportation Screw Plugging In the Scanner Initialization Connecting the Scanner to Your Computer Understanding Scsi connectionsDaisy Chain Setting the Scsi ID number Scsi CablesPage Do not use an external terminator Connecting the scanner CCautionPower-on sequence Power-off sequence For Windows 95 usersUsing Your Scanner Lights and Buttons Lights Placing a Document on the Scanner Before scanning a documentCorner of the document Removing the Cover for Thick or Large Documents Do not place heavy objects on top of the scannerSizing Up Your System RAM and hard disk sizeMonitors Accelerator boardsVideo cards File compression softwareMaintenance and Troubleshooting Maintenance Cleaning the scannerTransporting the Scanner Replacing the fluorescent lampsProblems and Solutions Error indicatorsReady light does not come on Operating problemsOperate light does not come on Scanner does not start scanningScanner software does not work properly Part of the image is distorted or blurred Quality problemsEntire image is distorted or blurred Edges of the document are not scannedStraight lines in the image are jagged Image is faint or out of focusImage is too dark Image does not look the same as the originalLine of dots is always missing in the scanned image Printed image is larger or smaller than the original size Your image cannot be printed or the printout is garbledTechnical Specifications 2Technical Specifications ScanningElectrical Safety Approvals EnvironmentalScsi Interface Initialization Methods Contacting Customer Support Contacting Customer SupportFor United Kingdom and the Republic of Ireland Users Enquiry DeskCustomer Support For Australian Users Epson FaxbackFor Singapore Users For Hong Kong UsersFor Philippines Users Electronic bulletin board systemGlossary Additive primary colorsESC/I Scsi Threshold Index Index IN-1IN-2 Index Index IN-3 IN-4 Index Epson Overseas Marketing Locations Epson AMERICA, INC