Setting Up the Scanner
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI devices to communicate properly with each other. You may need to change the terminator switch setting according to your computer system.
Caution:
Do not set the SCSI ID to an ID number that is already assigned to another device. Otherwise the computer, scanner, and other devices will not function properly.
c
Not available
*1Otherwise the scanner does not work properly.
Never selected1
Usually used for the SCSI board
Not available for Macintosh
May not be available for Windows
Always used for the Macintosh itself
4
5
6
7
Not available if your Macintosh has a built-in CD-ROM
3
Factory setting of the scanner
2
Not recommended
Usually
used for hard disk
1
Not recommended for Windows
Usually used for hard disk
Not available for Macintosh
Used for hard disk
0
Availability
Description
ID