Epson GT-5500 manual Electrical

Page 45

Color correction:	1 type for CRT display
	3 types for printer output (available in color
	byte sequence mode and color line
	sequence mode)

1type for user-defined

Interface:SCSI

Light source:	Xe-gas cold cathode fluorescent lamp
Reliability:	100,000 cycles of carriage movements
	(main unit MCBF)
Dimensions:	Width:	297 mm (11.9 inches)
	Depth:	443 mm (17.7 inches)
	Height:	87 mm (3.5 inches)
Weight:	Approx. 5 kg (11.1 lb)

Electrical

This product is also designed for IT power systems with Phase to Phase voltage 220-240V.

	100−120 V model	220−240 V model

Input voltage range	AC 90 to 132 V	AC 198 to 264 V

Rated frequency	50 to 60 Hz

Input frequency	49.5 to 60.5 Hz

Rated current	0.5 A	0.3 A

Power consumption	Approx. 20W

Note:

Check the label on the back of the scanner for the voltage of your scanner.

Technical Specifications

A-3

Image 45

Contents Page Scanner Parts GT-5500 Declaration of Conformity Contents Appendix a Technical Specifications Glossary Index Page Features IntroductionOptions Important Safety Instructions Scsi System Cable 25-pin to 50-pin B860081Scsi Peripheral Cable 50-pin to 50-pin B860091 Introduction For United Kingdom Users Safety informationSetting Up the Scanner Choosing a Place for the Scanner Removing the Transportation Screw Plugging In the Scanner Initialization Connecting the Scanner to Your Computer Understanding Scsi connectionsDaisy Chain Scsi Cables Setting the Scsi ID numberPage Do not use an external terminator CCaution Connecting the scannerPower-on sequence For Windows 95 users Power-off sequenceUsing Your Scanner Lights and Buttons Lights Before scanning a document Placing a Document on the ScannerCorner of the document Do not place heavy objects on top of the scanner Removing the Cover for Thick or Large DocumentsRAM and hard disk size Sizing Up Your SystemVideo cards Accelerator boardsMonitors File compression softwareMaintenance and Troubleshooting Cleaning the scanner MaintenanceReplacing the fluorescent lamps Transporting the ScannerError indicators Problems and SolutionsOperate light does not come on Operating problemsReady light does not come on Scanner does not start scanningScanner software does not work properly Entire image is distorted or blurred Quality problemsPart of the image is distorted or blurred Edges of the document are not scannedImage is too dark Image is faint or out of focusStraight lines in the image are jagged Image does not look the same as the originalLine of dots is always missing in the scanned image Your image cannot be printed or the printout is garbled Printed image is larger or smaller than the original sizeTechnical Specifications Scanning 2Technical SpecificationsElectrical Environmental Safety ApprovalsScsi Interface Initialization Methods Contacting Customer Support Contacting Customer SupportEnquiry Desk For United Kingdom and the Republic of Ireland UsersCustomer Support Epson Faxback For Australian UsersFor Hong Kong Users For Singapore UsersElectronic bulletin board system For Philippines UsersAdditive primary colors GlossaryESC/I Scsi Threshold Index IN-1 IndexIN-2 Index Index IN-3 IN-4 Index Epson Overseas Marketing Locations Epson AMERICA, INC