Epson GT-5500 manual Power-off sequence, For Windows 95 users

Page 24

❑For Windows 95 users:

The first time you turn on the computer after turning on the scanner, either of the following dialog boxes may appear.

If you see either of these, follow the installation instructions in Chapter 1 of your scanner software manual, and then see “Power-off sequence” below.

Power-off sequence

Keep the following in mind every time you turn off your computer and SCSI devices.

❑When you are finished using your system, turn off your computer first, then the scanner and other SCSI devices.

❑While using your computer, do not turn off the SCSI device whose terminator is active (on).

❑Do not turn the scanner off and back on while using your computer, otherwise the scanner may not scan properly.

Now that the connection is completed, you need to install the scanner software. See Chapter 1 of your scanner software manual.

1-12Setting Up the Scanner

Image 24

Contents Page Scanner Parts GT-5500 Declaration of Conformity Contents Appendix a Technical Specifications Glossary Index Page Features IntroductionOptions Important Safety Instructions Scsi System Cable 25-pin to 50-pin B860081Scsi Peripheral Cable 50-pin to 50-pin B860091 Introduction Safety information For United Kingdom UsersSetting Up the Scanner Choosing a Place for the Scanner Removing the Transportation Screw Plugging In the Scanner Initialization Connecting the Scanner to Your Computer Understanding Scsi connectionsDaisy Chain Setting the Scsi ID number Scsi CablesPage Do not use an external terminator Connecting the scanner CCautionPower-on sequence Power-off sequence For Windows 95 usersUsing Your Scanner Lights and Buttons Lights Placing a Document on the Scanner Before scanning a documentCorner of the document Removing the Cover for Thick or Large Documents Do not place heavy objects on top of the scannerSizing Up Your System RAM and hard disk sizeAccelerator boards Video cardsMonitors File compression softwareMaintenance and Troubleshooting Maintenance Cleaning the scannerTransporting the Scanner Replacing the fluorescent lampsProblems and Solutions Error indicatorsOperating problems Operate light does not come onReady light does not come on Scanner does not start scanningScanner software does not work properly Quality problems Entire image is distorted or blurredPart of the image is distorted or blurred Edges of the document are not scannedImage is faint or out of focus Image is too darkStraight lines in the image are jagged Image does not look the same as the originalLine of dots is always missing in the scanned image Printed image is larger or smaller than the original size Your image cannot be printed or the printout is garbledTechnical Specifications 2Technical Specifications ScanningElectrical Safety Approvals EnvironmentalScsi Interface Initialization Methods Contacting Customer Support Contacting Customer SupportFor United Kingdom and the Republic of Ireland Users Enquiry DeskCustomer Support For Australian Users Epson FaxbackFor Singapore Users For Hong Kong UsersFor Philippines Users Electronic bulletin board systemGlossary Additive primary colorsESC/I Scsi Threshold Index Index IN-1IN-2 Index Index IN-3 IN-4 Index Epson Overseas Marketing Locations Epson AMERICA, INC