Metrologic Instruments MS9500 manual Assembling the Stand, Kit #46-46055 Contains

Page 12

Assembling the Stand

Kit #46-46055 Contains:

a.	Stand		(mlpn 36-00343)	Qty 1
b.	Apron		(mlpn 50-50440)	Qty 1
c.	Screw, M3 x 6 mm long		(mlpn 18-18670)	Qty 2
d.	Washer, #5 x .5 OD		(mlpn 18-18671)	Qty 2
e.	Stand Anchor		(mlpn 50-50449)	Qty 1
f.	Wood Screw, #8 Round Head		(mlpn 18-18057)	Qty 4
g.	Base		(mlpn 36-36080)	Qty 1

			c.
		a.	d.
		a.
			b
		e.
		f.	g.
		f.

There are 2 options for assembling the stand. The first option allows the stand to be self-supporting and moved freely or placed anywhere on the countertop. The second option is used if the stand will be bolted/hard-mounted to the countertop.

Stand Option 1: Self-supported

Step 1

Slide the apron (mlpn 50-50440) over the stand (mlpn 36-00343).

Step 2

Position the stand so it sits under the tab on the apron. Then secure the apron to the stand using the M3 x 6 mm screws (mlpn18-18670) and the #5 washers (mlpn 18-18671) provided.

Step 1

Apron

Stand

7

Step 2 Tab

ApronStand

#5 Washer

M3 Screw

Image 12

Contents Page Locations USA Corporate Headquarters EuropeIii Table of Contents Appendix a Appendix BAppendix C Appendix DIntroduction Voyager Voyager CodeGate InterfaceScanner and Accessories ∙ Installation and User’s Guide MlpnVoyager MS9540 CodeGate Single-Line Laser Scanner Quick Start Installing the Scanner to the Host System Disconnecting PowerLink Cables from the Scanner How to Use CodeGate MS9540 Only Two Modes of OperationAssembling the Stand Kit #46-46055 ContainsStand Option 1 Self-supported Stand Option 2 Hard-mounted to countertop Scanner Parts Audible Indicators Three Beeps On Power UpOne Beep Razzberry ToneThis is a failure indicator. Refer to Failure Modes on Visual Indicators Alternating Flashing of Green and Red Steady Red, Green offFailure Modes Flashing Green and one Razzberry ToneProgramming Modes How does Serial Programming work?Host Scanner Feature Command Ascii Representation Response Abbreviated Ascii Table Upgrading the Flash Rom Firmware Labels Avoid Exposure laser light emitted from this apertureDepth of Field DistanceScanner Face Width of Scan FieldIR Activation Maintenance Applications and Protocols Scanner Version Communication Protocols IdentifierTrouble Shooting Guide Troubleshooting Guide Symptoms Possible Causes SolutionTroubleshooting Guide Unit scans Receiving data but RS-232 Demonstration Program Appendix a Design Specifications OperationalAppendix B Default Settings Light IBM KBW PENDTS/SIEMENS DTS/NIXDORF NCR F NCR S 46XX Light IBM Parameter Msec to Find Supplement Programmable Msec steps max Appendix C RdataCable Connector Configurations Standard PowerLink cable Pin D-type female connector to the PC FunctionCable Connector Configuration PowerLink Cable Pin Female DIN Pin FunctionPin Male Mini-DIN Pin Function Adapter Cable Pin Male DIN Pin FunctionAppendix D Warranty and Disclaimer Limited WarrantyAppendix E Notices RemarqueAchtung AttenzioneAppendix F PatentsAddendum AddendumIndex CdrhRMA