Metrologic Instruments MS9500 manual Appendix a Design Specifications, Operational

Page 35

Appendix A – Design Specifications

Operational

 

Light Source

Visible Laser Diode 650 nm ± 10 nm

Laser Power

0.96 mW (peak)

Depth of Scan Field

0 mm – 203 mm (0” – 8” for 0.330 mm (13 mil) bar code at

 

default setting

Scan Speed

72 scan lines per second

Scan Pattern

Single scan line

Minimum Bar Width

0.127 mm (5.0 mil)

InfraRed Activation

Long Range: 0 mm – 279 mm ± 51 mm (0” – 11” ± 2”)

 

Short Range: 0mm – 102 mm ± 25 mm (0” – 4” ± 1”)

Decode Capability

Autodiscriminates all standard bar codes’ for others call

 

Metrologic

System Interfaces

RS232, PC Keyboard Wedge, Stand-Alone Keyboard, OCIA,

 

IBM 468X/469X, Light Pen Emulation

Print Contrast

35% minimum reflectance difference

Number Characters

Up to 80 data characters

Read

(Maximum number will vary based on symbology and density)

Roll, Pitch, Yaw

42°, 68°, 52°

Beeper Operation

7 tones or no beep

Indicators (LED)

Green = laser on, ready to scan

 

Red = good read

 

Yellow (MS9540 Only) = CodeGate button is inactive (on).

 

CodeGate button is active (off)

Mechanical

 

Length

198 mm (7.8”)

Width-Handle

45 mm (1.8”)

Width-Head

78 mm (3.1”)

Depth

40 mm (1.6”)

Weight

149 g (5.25 oz)

Cable

Standard 2.7 m (9’) coiled; optional 2.1 m (7’) straight

Electrical

 

Input Voltage

5 VDC ± 0.25 V

Power – Operating

0.825 W

Power – Standby

0.600 W

Current – Operating

165 mA @ 5 VDC

Current – Standby

120 mA @ 5 VDC

DC Transformers

Class 2; 5.2V @ 650 mA

Laser Class

CDRH: Class II; EN60825-1:1994/A11:1996 Class 1

EMC

FCC Class B

Environmental

 

Operating Temperature

0°C to 40° (32° to 104°F)

Storage Temperature

-40°C to 60°C (-40°F to 140°F)

Humidity

5% to 95% relative humidity, non-condensing

Light Levels

Up to 4842 Lux (450 footcandles)

Shock

Designed to withstand 1.5 m (5’) drops

Contaminants

Sealed to resist airborne particulate contaminants

Ventilation

None required

30

Image 35
Contents Page USA Corporate Headquarters Europe LocationsIii Table of Contents Appendix D Appendix aAppendix B Appendix CVoyager Voyager CodeGate Interface IntroductionVoyager MS9540 CodeGate Single-Line Laser Scanner Scanner and Accessories∙ Installation and User’s Guide Mlpn Quick Start Installing the Scanner to the Host System Disconnecting PowerLink Cables from the Scanner Two Modes of Operation How to Use CodeGate MS9540 OnlyStand Option 1 Self-supported Assembling the StandKit #46-46055 Contains Stand Option 2 Hard-mounted to countertop Scanner Parts Razzberry Tone Audible IndicatorsThree Beeps On Power Up One BeepThis is a failure indicator. Refer to Failure Modes on Visual Indicators Steady Red, Green off Alternating Flashing of Green and RedFlashing Green and one Razzberry Tone Failure ModesHow does Serial Programming work? Programming ModesHost Scanner Feature Command Ascii Representation Response Abbreviated Ascii Table Upgrading the Flash Rom Firmware Avoid Exposure laser light emitted from this aperture LabelsWidth of Scan Field Depth of FieldDistance Scanner FaceIR Activation Maintenance Scanner Version Communication Protocols Identifier Applications and ProtocolsTrouble Shooting Guide Symptoms Possible Causes Solution Troubleshooting GuideTroubleshooting Guide Unit scans Receiving data but RS-232 Demonstration Program Operational Appendix a Design SpecificationsLight IBM KBW PEN Appendix B Default SettingsDTS/SIEMENS DTS/NIXDORF NCR F NCR S 46XX Light IBM Parameter Msec to Find Supplement Programmable Msec steps max Rdata Appendix CPin D-type female connector to the PC Function Cable Connector Configurations Standard PowerLink cableAdapter Cable Pin Male DIN Pin Function Cable Connector ConfigurationPowerLink Cable Pin Female DIN Pin Function Pin Male Mini-DIN Pin FunctionLimited Warranty Appendix D Warranty and DisclaimerRemarque Appendix E NoticesAttenzione AchtungPatents Appendix FAddendum AddendumCdrh IndexRMA