Datalogic Scanning C-BOX 200 installation manual Power Supply, Power switch ON/OFF positions

DATALOGIC C-BOX 200

2.4.1 Power Supply

Power is supplied to the C-BOX 200 through the pins provided on the spring clamp connector.

The power switch (see Figure 2.6) switches the power supply ON or OFF for both the C-BOX 200 and the connected scanner.

S1

ON

OFF

Figure 2.6 - Power switch ON/OFF positions

C-BOX

1 VS

2 GND

USER INTERFACE

V+ (10 - 30 Vdc)

GND

Figure 2.7 - Power supply connections

NOTE

Pin 1 is also electrically connected to pins 3 and 5, just as pin 2 is electrically connected to pins 4 and 6. This is useful for external trigger/inputs connections.

The power supply must be between 10 and 30 Vdc only.

Installation - 7