Yamaha LPX-510 Turning On the Projector, Connecting the Power Cord, Components connected to

Page 11

Turning On the Projector

This section describes the procedure from turning on the power to projecting images.

Be sure to read the Safety Instructions in this manual for details on safe handling when using the projector.

Connecting the Power Cord

1

Check that the power is turned off for all

components connected to the

projector.

2

3

Connect the computer or other video source to the projector.

Refer to the Setup Guide.

Remove the lens cap.

4

5

Connect the accessory power cord to the projector.

Check that the power cord connector is facing the same way as the power inlet on the projector, and then insert the power cord connector securely into the projector.

 

Lights orange

Connect the other end of the power

 

 

cord to a grounded electrical outlet.

 

STANDBY/ON

The

indicator will light orange and the

 

 

projector will switch to standby mode.

ESCAPE

MENU

 

 

PATTERN

SETTING

ASPECT

INPUT

6

Image 11
Contents LPX-510 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customersFor U.K. customers InstallationOperation OthersIndications Alleen voor klanten in NederlandContents Do not touch the lens with bare hands Remove the batteries from the remote control before storageAttach the lens cap to the lens Retract the adjustable foot Check the included accessories AccessoriesEquipped with a wide- angle lens shift function Features of the ProjectorTurning Off the Projector Turning On the ProjectorComponents connected to Connecting the Power CordCheck that the power is turned off for all Turning On the ProjectorTurning On the Projector Turning On the Power and Projecting ImagesTurn on the power for all equipment Connected to the projectorNEC Cord plug from the wall outlet If not using the projector for longTurning Off the Projector ProjectorEquipment ExtendedAttach the lens cap Disconnect the cords that areExit adjustment mode Adjusting the Screen ImageAdjusting the Image Size Zoom adjustment Adjust the image sizeTurn the two lens shift dials to adjust Projection image position adjustment Lens shiftCorrecting Keystone Distortion Keystone Grayscale pattern Select a patternConfirm the pattern selection CrosshatchExit the pattern display Adjust the focus Adjusting the Image QualityFocus adjustment Select a setting value Brightness adjustment Iris adjustmentSelect the picture mode Selecting the picture modePress the Aspect button on Button on the remote controlSelect the aspect mode Zoom mode Normal modeSqueeze mode Squeeze Through mode Smart Zoom modeThrough mode Advanced Operations Description of Functions Functions for Enhancing ProjectionAbs. Color Temp Absolute Color Temperature and Flesh Tone AdjustmentRGB adjustment Adjusting flesh tonesMenus p.28 Saving and Retrieving Image Quality Settings Memory SaveSettings that can be saved in memory Storing image quality settingsControl panel or the button on Retrieving Saved Image Quality SettingsLine menu Using the Menu FunctionsList of Menus Full menuAdvanced Operations Picture Quality Input A, B Component When computer signals are being inputImage Menu Reset Color AdjustmentPicture Mode *1 Auto Setup *1Signal Setup MenuVertical Size ScreenZoom Lock On-Screen Display User’s LogoInfo Menu Reset MenuDisplay the menu screen Using the MenusSelect a setting item in the sub-menu Displaying and Operating Full MenusExit the menu display Change the settingDisplaying and Operating Line Menus Select an item to be set When Having Some Trouble TroubleshootingGuide When Having Some TroubleWhen Having Some Trouble No images appear When the Indicators Provide No HelpProblems relating to images Images are fuzzy or out of focus Message No Signal. is displayedMessage Not Supported. is displayed Image is truncated large or small Interference or distortion appear in imagesVertical interference appears in the projected images Image colors are not rightImages appear dark Projection stops automaticallyRemote control does not work Problems when projection startsPower does not turn on Problems with the remote controlGlossary MaintenanceSpecifications Appearance Cleaning the Lens MaintenanceCleaning Cleaning the Projector CaseDown period to end takes Cleaning the Air FilterTurn off the power, wait for the cool Removing the Air FilterLAMP/COVER indicator flashes orange or lights red Lamp Replacement PeriodInstall the air filter Install the air filter coverReplacing the Lamp Securely tighten the lamp fixing screws Install the new lampInstall the lamp cover, then tighten Loosen the screws fixing the lamp Remove the old lampResetting the Lamp Operating Time Reset the lamp operating timeExample Portions of the image, adjust While checking the tone adjustmentScreen, adjust the settings starting From the one where the vertical stripeCeiling mount bracket for high ceilings Optional AccessoriesLamp cartridge Ceiling mount bracket for low ceilingsComponent Video/RGB Video List of Supported Signal ResolutionsAnalog-RGB signals/signals input to the Hdmi port Specifications Appearance Center of lens = Default lens shift positionPart Names and Functions TEMP/FAN indicator p.42 LAMP/COVER indicator p.42Indicator p.6, 7 Setting button p.11, 16Video port Setup Guide D4 Video port Setup GuideInput A/INPUT B ports Setup Guide Hdmi port Setup GuideIris button p.17 IndicatorLight switch Setup Guide Zoom button p.11Component GlossarySync GlossaryPage 2004 Screen Size and Setting-up Distance Setting-up Methods Before Using the Remote ControlBattery Replacement Period Inserting the batteries and replacement periodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Richtig IncorrectCorrect FalschCorrecto Incorrecto

LPX-510 specifications

The Yamaha LPX-510 is a cutting-edge digital piano that combines traditional craftsmanship with modern technology to provide an unparalleled musical experience. Designed for both beginners and experienced musicians, the LPX-510 boasts features that cater to a wide range of playing styles.

One of the standout features of the LPX-510 is its Graded Hammer Standard (GHS) action. This technology simulates the feel of an acoustic piano by offering heavier resistance in the lower keys and lighter resistance in the upper keys. The result is a more authentic playing experience, allowing musicians to express themselves more fully. Additionally, the keys are touch-sensitive, enabling dynamic control over the sound based on how hard or soft the keys are played.

Sound quality is another hallmark of the LPX-510. Equipped with advanced sampling technology, this digital piano features a range of high-quality instrument sounds, including grand pianos, electric pianos, organs, and string instruments. The AWM Stereo Sampling technique captures the nuances of each instrument, ensuring that the sound produced is rich and realistic. The LPX-510 also comes with a variety of built-in effects, such as reverb and chorus, providing further customization to the sound.

The LPX-510 is designed with versatility in mind. It includes multiple connectivity options, including USB to host, allowing for easy integration with computers and music production software. The MIDI capability enables musicians to connect the piano to external devices, enhancing its functionality for composition and recording. Additionally, Bluetooth connectivity allows for wireless communication with smart devices, making it simple to explore various applications for practice and learning.

Another key characteristic of the LPX-510 is its compact design. With its sleek, modern aesthetic, this digital piano fits seamlessly into any home or studio setting. The user-friendly interface, complete with an intuitive control panel, ensures that players can easily navigate through its various features and settings without confusion.

The Yamaha LPX-510 also places a strong emphasis on educational tools. It offers a range of practice features, including a song recording function and a built-in metronome, helping musicians refine their skills. Furthermore, the digital piano is compatible with Yamaha's Chord Track app, which allows players to learn popular songs and practice chord progressions in a fun and engaging way.

In conclusion, the Yamaha LPX-510 is a remarkable digital piano that excels in sound quality, playability, and connectivity. Whether for practice, performance, or composition, it offers an exceptional platform for musicians of all levels to unleash their creativity. With its combination of advanced technologies and thoughtful design, the LPX-510 stands as a versatile instrument that enriches the musical journey of every player.