Part Names and Functions
Control Panel
STANDBY/ON
ESCAPE | MENU |
PATTERN | SETTING |
ASPECT | INPUT |
LAMP/COVER | TEMP/FAN |
HOME CINEMA PROJECTOR LPX- 510
[STANDBY/ON] button (p.7, 9)
Press to turn the projector's power on and off.
[ESCAPE] button (p.11, 16, 17, 38, 39)
When pressed while a menu or selection menu is being displayed, the screen changes to the
[PATTERN] button (p.14)
Displays a selection menu for selecting a test pattern.
/ / − / + buttons (p.11, 13, 14, 16, 37, 38, 39)
Used to select menu commands and change adjustment values.
[ASPECT] button (p.19)
Displays a selection menu for selecting the aspect.
LAMP/COVER indicator (p.42)
Lights or flashes in different colors to indicate problems with the projection lamp.
indicator (p.6, 7, 42)
Flashes or lights in different colors to indicate the operating status of the projector.
[MENU] button (p.18, 26, 37, 38, 39)
The full menu is displayed and cleared each time this button is pressed.
[SETTING] button (p.11, 16, 17)
Selects the lens adjustment mode. The adjustment mode changes in the order of zoom
→focus → iris each time the button is pressed. Adjustment modes that have been set to lock will not be displayed.
button (p.14, 18, 19, 27, 37, 38, 39)
Displays the line menu.
When pressed while a menu or selection menu is being displayed, a menu command is selected and the next menu is then displayed.
[INPUT] button (p.7)
Displays a selection menu for selecting the image source.
TEMP/FAN indicator (p.42)
Lights or flashes in different colors to indicate problems with the projector's internal temperature.
64