Yamaha LPX-510 owner manual Do not touch the lens with bare hands

Page 7

Notes on Handling and Storage

Be sure to observe the following precautions to avoid malfunctions, operating errors or damage to the projector.

Notes on Handling and Storage

•Do not set up the projector near high-voltage electrical wires or sources of magnetic fields.

These may interfere with correct operation.

•Do not touch the lens with bare hands.

If fingerprints or grease get onto the lens, it can interfere with the quality of the projected images. Attach the lens cover to the lens when the projector is not in use.

•During projection, some points (dots) may appear lit at all times, or they may be dark at all times.

This is caused by the characteristics of the LCD panel, and is not a sign of a malfunction. The LCD panel is manufactured using extremely high-precision technology. However, black dots may appear on the panel, or some red, blue or green dots may light extremely brightly at times. Furthermore, sometimes stripe-shaped color irregularities or brightness irregularities may also appear.

•Remove the batteries from the remote control before storage.

If the batteries are left in the remote control for long periods, they may leak.

•Always attach the lens cap to the lens when not using the projector, to prevent the lens from becoming dirty or damaged.

•The mercury lamp that is used as the light source for the projector deteriorates as a result of impacts or damage, and also naturally over time as it is used. It may explode with a loud noise or stop illuminating, or the flickering may increase or illumination may stop, and these indicate the end of the lamp's operating life.

At such times, the amount of time remaining before the lamp breaks or stops working may vary greatly depending on the individual lamp characteristics and the operating environment. These are normal characteristics of mercury lamps. You should always have a spare lamp ready in case it is needed.

•YAMAHA takes no responsibility for loss or damage caused by damage to the projector or operating failures outside normal service warranty conditions.

Lamp Operating Errors

The mercury lamp that is used as the light source for this projector may stop operating on occasions. This is a normal characteristic of mercury lamps. If the lamp does not turn on when the projector's power is turned on, remove the lamp and check if it is broken. If the lamp is not broken, reinstall it. Refer to "Replacing the Lamp" on page 53 of this manual for instruction on removing and reinstalling the lamp.

If the lamp is broken, replace it with a new lamp. It is recommended that you have a spare lamp ready at all times in case it is needed.

Notes on Carrying the Projector

•Turn off the projector power and then disconnect the power cord from the electrical outlet.

Furthermore, check that all other cables have been disconnected.

•Attach the lens cap to the lens.

•Retract the adjustable foot.

Notes when transporting the projector

When packing up the projector in its container for transportation, use the lens shift function to lower the lens fully.

2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents LPX-510 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customersFor U.K. customers InstallationOperation OthersIndications Alleen voor klanten in NederlandContents Attach the lens cap to the lens Retract the adjustable foot Remove the batteries from the remote control before storageDo not touch the lens with bare hands Check the included accessories AccessoriesEquipped with a wide- angle lens shift function Features of the ProjectorTurning Off the Projector Turning On the ProjectorComponents connected to Connecting the Power CordCheck that the power is turned off for all Turning On the ProjectorTurning On the Projector Turning On the Power and Projecting ImagesTurn on the power for all equipment Connected to the projectorNEC Cord plug from the wall outlet If not using the projector for longTurning Off the Projector ProjectorEquipment ExtendedAttach the lens cap Disconnect the cords that areExit adjustment mode Adjusting the Screen ImageAdjusting the Image Size Zoom adjustment Adjust the image sizeTurn the two lens shift dials to adjust Projection image position adjustment Lens shiftCorrecting Keystone Distortion Keystone Grayscale pattern Select a patternConfirm the pattern selection CrosshatchExit the pattern display Focus adjustment Adjusting the Image QualityAdjust the focus Select a setting value Brightness adjustment Iris adjustmentSelect the picture mode Selecting the picture modeSelect the aspect mode Button on the remote controlPress the Aspect button on Squeeze mode Normal modeZoom mode Through mode Smart Zoom modeSqueeze Through mode Advanced Operations Description of Functions Functions for Enhancing ProjectionAbs. Color Temp Absolute Color Temperature and Flesh Tone AdjustmentRGB adjustment Adjusting flesh tonesMenus p.28 Saving and Retrieving Image Quality Settings Memory SaveSettings that can be saved in memory Storing image quality settingsControl panel or the button on Retrieving Saved Image Quality SettingsLine menu Using the Menu FunctionsList of Menus Full menuAdvanced Operations Image Menu Input A, B Component When computer signals are being inputPicture Quality Reset Color AdjustmentPicture Mode *1 Auto Setup *1Signal Setup MenuVertical Size ScreenZoom Lock On-Screen Display User’s LogoInfo Menu Reset MenuDisplay the menu screen Using the MenusSelect a setting item in the sub-menu Displaying and Operating Full MenusDisplaying and Operating Line Menus Change the settingExit the menu display Select an item to be set When Having Some Trouble TroubleshootingGuide When Having Some TroubleWhen Having Some Trouble Problems relating to images When the Indicators Provide No HelpNo images appear Message Not Supported. is displayed Message No Signal. is displayedImages are fuzzy or out of focus Image is truncated large or small Interference or distortion appear in imagesVertical interference appears in the projected images Image colors are not rightImages appear dark Projection stops automaticallyRemote control does not work Problems when projection startsPower does not turn on Problems with the remote controlSpecifications Appearance MaintenanceGlossary Cleaning the Lens MaintenanceCleaning Cleaning the Projector CaseDown period to end takes Cleaning the Air FilterTurn off the power, wait for the cool Removing the Air FilterLAMP/COVER indicator flashes orange or lights red Lamp Replacement PeriodInstall the air filter Install the air filter coverReplacing the Lamp Securely tighten the lamp fixing screws Install the new lampInstall the lamp cover, then tighten Loosen the screws fixing the lamp Remove the old lampResetting the Lamp Operating Time Reset the lamp operating timeExample Portions of the image, adjust While checking the tone adjustmentScreen, adjust the settings starting From the one where the vertical stripeCeiling mount bracket for high ceilings Optional AccessoriesLamp cartridge Ceiling mount bracket for low ceilingsComponent Video/RGB Video List of Supported Signal ResolutionsAnalog-RGB signals/signals input to the Hdmi port Specifications Appearance Center of lens = Default lens shift positionPart Names and Functions TEMP/FAN indicator p.42 LAMP/COVER indicator p.42Indicator p.6, 7 Setting button p.11, 16Video port Setup Guide D4 Video port Setup GuideInput A/INPUT B ports Setup Guide Hdmi port Setup GuideIris button p.17 IndicatorLight switch Setup Guide Zoom button p.11Component GlossarySync GlossaryPage 2004 Screen Size and Setting-up Distance Setting-up Methods Before Using the Remote ControlBattery Replacement Period Inserting the batteries and replacement periodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Richtig IncorrectCorrect FalschCorrecto Incorrecto

LPX-510 specifications

The Yamaha LPX-510 is a cutting-edge digital piano that combines traditional craftsmanship with modern technology to provide an unparalleled musical experience. Designed for both beginners and experienced musicians, the LPX-510 boasts features that cater to a wide range of playing styles.

One of the standout features of the LPX-510 is its Graded Hammer Standard (GHS) action. This technology simulates the feel of an acoustic piano by offering heavier resistance in the lower keys and lighter resistance in the upper keys. The result is a more authentic playing experience, allowing musicians to express themselves more fully. Additionally, the keys are touch-sensitive, enabling dynamic control over the sound based on how hard or soft the keys are played.

Sound quality is another hallmark of the LPX-510. Equipped with advanced sampling technology, this digital piano features a range of high-quality instrument sounds, including grand pianos, electric pianos, organs, and string instruments. The AWM Stereo Sampling technique captures the nuances of each instrument, ensuring that the sound produced is rich and realistic. The LPX-510 also comes with a variety of built-in effects, such as reverb and chorus, providing further customization to the sound.

The LPX-510 is designed with versatility in mind. It includes multiple connectivity options, including USB to host, allowing for easy integration with computers and music production software. The MIDI capability enables musicians to connect the piano to external devices, enhancing its functionality for composition and recording. Additionally, Bluetooth connectivity allows for wireless communication with smart devices, making it simple to explore various applications for practice and learning.

Another key characteristic of the LPX-510 is its compact design. With its sleek, modern aesthetic, this digital piano fits seamlessly into any home or studio setting. The user-friendly interface, complete with an intuitive control panel, ensures that players can easily navigate through its various features and settings without confusion.

The Yamaha LPX-510 also places a strong emphasis on educational tools. It offers a range of practice features, including a song recording function and a built-in metronome, helping musicians refine their skills. Furthermore, the digital piano is compatible with Yamaha's Chord Track app, which allows players to learn popular songs and practice chord progressions in a fun and engaging way.

In conclusion, the Yamaha LPX-510 is a remarkable digital piano that excels in sound quality, playability, and connectivity. Whether for practice, performance, or composition, it offers an exceptional platform for musicians of all levels to unleash their creativity. With its combination of advanced technologies and thoughtful design, the LPX-510 stands as a versatile instrument that enriches the musical journey of every player.
Top Page Image Contents