When the Indicators Provide No Help
Interference or distortion appear in images
Are the image signal format settings | When a composite video or | ||
correct? | If images cannot be projected even when the "Video Signal" menu | ||
|
|
| command is set to "Auto", change the setting to the signal format |
|
|
| for the connected equipment. |
|
|
| "Setup" - "Input Signal" - "Video Signal" (p.36) |
|
|
|
|
|
|
| If connected to the INPUT A or INPUT B port |
|
|
| Check that the connectors of the connection cable are inserted into |
|
|
| the correct ports. (Setup Guide) |
|
|
|
|
Are the cables connected correctly? | Check that all of the cables required for projection are securely | ||
|
|
| connected. (Setup Guide) |
|
|
|
|
Is an extension cable being used? | If an extension cable is used, interference may increase. Try | ||
|
|
| connecting a signal amplifier. |
|
|
|
|
Have the "Sync. " and "Tracking " | The projector has an automatic adjustment function for projecting | ||
I | |||
settings been adjusted correctly? | images at optimum quality. However, some types of signal may | ||
|
|
| not be adjusted correctly even when the automatic adjustment |
| Only when projecting |
| |
|
| function is applied. In such cases, use the "Tracking" and "Sync." | |
| computer images |
| menu commands to adjust the signals. |
|
|
| "Image" - "Picture Quality" - "Tracking", "Sync." (p.30) |
|
|
| |
|
|
|
|
Has the correct resolution been | Set the computer so that the output signals are compatible with | ||
selected? | this projector. | ||
|
|
| "List of Supported Signal Resolutions" (p.59), |
| Only when projecting |
| |
|
| Computer documentation | |
| computer images |
|
|
|
|
|
|
|
|
|
|
Image is truncated (large) or small
Has the correct aspect been selected? | Press the | button on the remote control or the [ASPECT] | ||
|
|
|
| ASPECT |
|
|
| button on the projector's control panel to select the aspect that | |
|
|
| matches the input signals. (p.19) | |
|
|
| If images with subtitles are being projected using the "Zoom" | |
|
|
| command, use the "Zoom Caption" menu command to adjust. | |
|
|
| (p.33) |
|
|
|
|
| |
Has the "Position" setting been adjusted | Use the "Position" menu command to adjust. | |||
correctly? | "Setup" - "Screen" - "Position" (p.33) | |||
|
|
|
| |
Has the computer been set for dual | If dual display has been activated in the Display Properties of the | |||
display? | computer's Control Panel, the projector will only project about | |||
|
|
| half of the image on the computer screen. To display the whole of | |
| Only when projecting |
| ||
|
| the image on the computer screen, turn off the dual display setting. | ||
| computer images |
| Computer video driver documentation | |
|
|
|
| |
|
|
|
|
|
Has the correct resolution been | Set the computer so that the signals that are output are compatible | |||
selected? | with this projector. | |||
|
|
| "List of Supported Signal Resolutions" (p.59), | |
| Only when projecting |
| ||
|
| Computer documentation | ||
| computer images |
|
|
|
|
|
|
|
|
|
|
|
|
|
46