Yamaha LPX-510 owner manual Brightness adjustment Iris adjustment, Select a setting value

Page 22

Adjusting the Image Quality

Brightness adjustment (Iris adjustment)

The brightness of the images can be adjusted.

When projecting in dark rooms or onto small screens and the images appear too bright, decrease the setting.

1	STANDBY/ON
	ESCAPE	MENU
		ZOOM	FOCUS
		IRIS SETTING	PATT
	PATTERN	SETTING
		ESCAPE	MENU
	ASPECT	INPUT
	Projector	Remote control

Press the [SETTING] button on the projector's control panel or the IRIS button on the remote control.

The line menu will be displayed over the images that are being projected.

The adjustment mode changes as follows each time the [SETTING] button on the projector's control panel is pressed.

Zoom → Focus → Iris

Operations

STANDBY/ON

2	IRIS SETTING	PATT
2	ESCAPE	MENU
ESCAPE	MENU
PATTERN	SETTING
	ASPECT	INPUT
ASPECT	INPUT
	LIGHT	HIDE
Projector	Remote control

Select a setting value.

If using the projector's control panel, press the - or + button.

If using the remote control, tilt the button horizontally.

Adjustment is also possible while a test pattern is being projected.

Basic

3	STANDBY/ON			Exit adjustment mode.
3				Press the [ESCAPE] button on the projector's
	ESCAPE	MENU	ZOOM FOCUS	control panel or the IRIS button on the remote
		IRIS	SETTING PATT	control.
	PATTERN	SETTING
		ESCAPE	MENU
	ASPECT	INPUT
	Projector	Remote control

The Lamp Power menu can also be used to make the adjustment. (p.34)

17

Image 22

Contents LPX-510 Important Safety Instructions FCC Information for US customers We Want You Listening For a LifetimeOthers InstallationOperation For U.K. customersAlleen voor klanten in Nederland IndicationsContents Attach the lens cap to the lens Retract the adjustable foot Remove the batteries from the remote control before storageDo not touch the lens with bare hands Accessories Check the included accessoriesFeatures of the Projector Equipped with a wide- angle lens shift functionTurning On the Projector Turning Off the ProjectorTurning On the Projector Connecting the Power CordCheck that the power is turned off for all Components connected toConnected to the projector Turning On the Power and Projecting ImagesTurn on the power for all equipment Turning On the ProjectorNEC Projector If not using the projector for longTurning Off the Projector Cord plug from the wall outletDisconnect the cords that are ExtendedAttach the lens cap EquipmentAdjust the image size Adjusting the Screen ImageAdjusting the Image Size Zoom adjustment Exit adjustment modeProjection image position adjustment Lens shift Turn the two lens shift dials to adjustCorrecting Keystone Distortion Keystone Crosshatch Select a pattern Confirm the pattern selection Grayscale patternExit the pattern display Focus adjustment Adjusting the Image QualityAdjust the focus Brightness adjustment Iris adjustment Select a setting valueSelecting the picture mode Select the picture modeSelect the aspect mode Button on the remote controlPress the Aspect button on Squeeze mode Normal modeZoom mode Through mode Smart Zoom modeSqueeze Through mode Advanced Operations Functions for Enhancing Projection Description of FunctionsAdjusting flesh tones Absolute Color Temperature and Flesh Tone AdjustmentRGB adjustment Abs. Color TempStoring image quality settings Saving and Retrieving Image Quality Settings Memory SaveSettings that can be saved in memory Menus p.28Retrieving Saved Image Quality Settings Control panel or the button onFull menu Using the Menu FunctionsList of Menus Line menuAdvanced Operations Image Menu Input A, B Component When computer signals are being inputPicture Quality Auto Setup *1 Color AdjustmentPicture Mode *1 ResetSetup Menu SignalScreen Vertical SizeZoom Lock User’s Logo On-Screen DisplayReset Menu Info MenuDisplaying and Operating Full Menus Using the MenusSelect a setting item in the sub-menu Display the menu screenDisplaying and Operating Line Menus Change the settingExit the menu display Select an item to be set Troubleshooting When Having Some TroubleWhen Having Some Trouble GuideWhen Having Some Trouble Problems relating to images When the Indicators Provide No HelpNo images appear Message Not Supported. is displayed Message No Signal. is displayedImages are fuzzy or out of focus Interference or distortion appear in images Image is truncated large or smallProjection stops automatically Image colors are not rightImages appear dark Vertical interference appears in the projected imagesProblems with the remote control Problems when projection startsPower does not turn on Remote control does not workSpecifications Appearance MaintenanceGlossary Cleaning the Projector Case MaintenanceCleaning Cleaning the LensRemoving the Air Filter Cleaning the Air FilterTurn off the power, wait for the cool Down period to end takesInstall the air filter cover Lamp Replacement PeriodInstall the air filter LAMP/COVER indicator flashes orange or lights redReplacing the Lamp Loosen the screws fixing the lamp Remove the old lamp Install the new lampInstall the lamp cover, then tighten Securely tighten the lamp fixing screwsReset the lamp operating time Resetting the Lamp Operating TimeExample From the one where the vertical stripe While checking the tone adjustmentScreen, adjust the settings starting Portions of the image, adjustCeiling mount bracket for low ceilings Optional AccessoriesLamp cartridge Ceiling mount bracket for high ceilingsList of Supported Signal Resolutions Component Video/RGB VideoAnalog-RGB signals/signals input to the Hdmi port Specifications Center of lens = Default lens shift position AppearancePart Names and Functions Setting button p.11, 16 LAMP/COVER indicator p.42Indicator p.6, 7 TEMP/FAN indicator p.42Hdmi port Setup Guide D4 Video port Setup GuideInput A/INPUT B ports Setup Guide Video port Setup GuideZoom button p.11 IndicatorLight switch Setup Guide Iris button p.17Glossary ComponentGlossary SyncPage 2004 Before Using the Remote Control Screen Size and Setting-up Distance Setting-up MethodsInserting the batteries and replacement period Battery Replacement PeriodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Falsch IncorrectCorrect RichtigIncorrecto Correcto