Functions for Enhancing Projection
2 |
|
|
|
|
| Select "Memory Save" from the sub- |
Image | Setup |
| Info | Reset | menu of the "Image" menu, and then | |
|
|
|
|
| ||
|
|
|
|
| Return | press the button on the projector's |
|
|
|
|
|
| |
| Picture Quality |
|
|
| ||
| Color Adjustment |
|
|
| control panel or the button on the | |
| Picture Mode | Dynamic |
|
Memory Save |
| remote control. |
Reset |
| |
|
|
ESC :Return :Select :Enter
STANDBY/ON
3 | IRIS | SETTING PATT |
ESCAPE | MENU | |
ESCAPE | MENU |
|
PATTERN | SETTING |
|
| ASPECT | INPUT |
ASPECT | INPUT |
|
| LIGHT | HIDE |
Projector | Remote control | |
[Memory] |
| Return |
Memory1
Memory2
Memory3
Memory4
Memory5
Memory6
Select the memory number (1 - 6) to use for saving the settings, and then press
the button on the projector's control
panel or the button on the remote control.
The icon for the memory number selected will
change from to .
If you select a memory number that already contains stored settings, the previous settings will be cleared and the current settings will be stored in their place.
Operations
ESC:Return :Select :Setting
Retrieving Saved Image Quality Settings
Advanced
S VIDEO | A | HDMI |
VIDEO | B | D4 |
| INPUT |
|
| MEMORY |
|
1 | 2 | 3 |
456
Remote control
Memory 5
Press one of the remote control memory buttons [1] to [6] corresponding to the image quality settings to be retrieved.
The selected memory number will be displayed at the
•If you press one of the remote control
memory buttons [1] to [6] that has no stored memory settings, the images being projected will not change.
•Memory settings that have been applied to images will be retained even when the projector's power is turned off. The same memory adjustment settings will be applied to images that are projected the next time the projector's power is turned on.
•The aspect setting retrieved from memory may not be applied to the images if they are 16:9 images or if the input signal images have a particular resolution.
27