Adjusting the Image Quality
Selecting the Image Aspect Ratio
This selects the ratio between the height and width of the projected images.
If the input signal includes aspect ratio information, the projector's automatic mode will detect this information and use it to automatically change the aspect ratio to the optimum ratio.
•Automatic mode can only be set when signals are being input to the VIDEO, S VIDEO, D4 or HDMI port.
When such signals are projected in automatic mode, the projector switches to the optimum aspect ratio depending on the signal as shown below.
• | For 4:3 input signals | → Normal |
• | For input signals recorded in squeeze mode | → Squeeze |
• | For letterbox input signals | → Zoom |
*If the connected equipment is not
The default settings for each connection port are as follows.
• VIDEO, S VIDEO, D4 and HDMI ports | → Auto |
• INPUT A and INPUT B ports | → Normal |
1 | ESCAPE | MENU | ESCAPE | MENU | Press the [ASPECT] button on the |
|
|
|
| projector's control panel or the ASPECT | |
| PATTERN |
| SETTING |
| button on the remote control. |
|
|
| ASPECT | INPUT | The select (Resize) menu will be displayed. |
| ASPECT | INPUT |
|
|
|
|
|
| LIGHT | HIDE |
|
|
|
| S VIDEO A | HDMI |
|
| Projector |
| Remote control |
|
Basic Operations
2
Resize
Auto
Normal
Squeeze
Zoom
Through
Squeeze Through
Smart Zoom
Select the aspect mode.
If using the projector's control panel, press the
or button to select the aspect Mode, and press
the button to confirm the selection.
If using the remote control, tilt the button vertically to select the aspect Mode, and press
the button to confirm the selection.
19