Yamaha LPX-510 owner manual Info Menu, Reset Menu

Page 40

Using the Menu Functions

Input Signal

Main menu

Function

Default

setting

 

 

 

 

 

Video Signal

Sets the signal format in accordance with the video equipment that is connected to the

Auto

 

VIDEO or S VIDEO port. If set to "Auto", the video signal format is set automatically.

 

 

If there is a lot of interference in the image, or if a problem such as no image being

 

 

projected occurs even though "Auto" has been selected, select the correct signal format

 

 

manually.

 

 

 

 

Input A

Sets the signal format in accordance with the video equipment that is connected to the

Component

 

INPUT A or INPUT B port or the signal being output from a computer.

 

Input B

 

 

 

 

 

 

Language

This sets the display language for messages and menus. (Default setting:English (Varies depending on country of purchase))

Reset

This returns all adjustment values in the "Setup" menu (other than the "User's Logo", "Input Signal" and "Language" command settings) to their default values.

"Info" Menu

The "Info" menu shows information about the operating status of the projector such as lamp usage time, image source, input signal, input resolution, video signal format, refresh rate and sync information.

"Reset" Menu

Lamp-Hours Reset

This initialises the lamp operating time. When this command is selected, the cumulative operating time for the lamp is cleared and returned to the default setting.

Memory Reset

This resets (clears) all settings that have been stored using the "Memory Save" command.

All Reset

This resets all menu command settings. However, the "Memory Save", "User's Logo", "Input Signal", "Lamp Hours" and "Language" settings are not reset.

36

Page 39 Page 41
Image 40
Page 39 Page 41
Contents LPX-510 Important Safety Instructions FCC Information for US customers We Want You Listening For a LifetimeInstallation OperationOthers For U.K. customersAlleen voor klanten in Nederland IndicationsContents Attach the lens cap to the lens Retract the adjustable foot Remove the batteries from the remote control before storageDo not touch the lens with bare hands Accessories Check the included accessoriesFeatures of the Projector Equipped with a wide- angle lens shift functionTurning On the Projector Turning Off the ProjectorConnecting the Power Cord Check that the power is turned off for allTurning On the Projector Components connected toTurning On the Power and Projecting Images Turn on the power for all equipmentConnected to the projector Turning On the ProjectorNEC If not using the projector for long Turning Off the ProjectorProjector Cord plug from the wall outletExtended Attach the lens capDisconnect the cords that are EquipmentAdjusting the Screen Image Adjusting the Image Size Zoom adjustmentAdjust the image size Exit adjustment modeProjection image position adjustment Lens shift Turn the two lens shift dials to adjustCorrecting Keystone Distortion Keystone Select a pattern Confirm the pattern selectionCrosshatch Grayscale patternExit the pattern display Focus adjustment Adjusting the Image QualityAdjust the focus Brightness adjustment Iris adjustment Select a setting valueSelecting the picture mode Select the picture modeSelect the aspect mode Button on the remote controlPress the Aspect button on Squeeze mode Normal modeZoom mode Through mode Smart Zoom modeSqueeze Through mode Advanced Operations Functions for Enhancing Projection Description of FunctionsAbsolute Color Temperature and Flesh Tone Adjustment RGB adjustmentAdjusting flesh tones Abs. Color TempSaving and Retrieving Image Quality Settings Memory Save Settings that can be saved in memoryStoring image quality settings Menus p.28Retrieving Saved Image Quality Settings Control panel or the button onUsing the Menu Functions List of MenusFull menu Line menuAdvanced Operations Image Menu Input A, B Component When computer signals are being inputPicture Quality Color Adjustment Picture Mode *1Auto Setup *1 ResetSetup Menu SignalScreen Vertical SizeZoom Lock User’s Logo On-Screen DisplayReset Menu Info MenuUsing the Menus Select a setting item in the sub-menuDisplaying and Operating Full Menus Display the menu screenDisplaying and Operating Line Menus Change the settingExit the menu display Select an item to be set Troubleshooting When Having Some TroubleWhen Having Some Trouble GuideWhen Having Some Trouble Problems relating to images When the Indicators Provide No HelpNo images appear Message Not Supported. is displayed Message No Signal. is displayedImages are fuzzy or out of focus Interference or distortion appear in images Image is truncated large or smallImage colors are not right Images appear darkProjection stops automatically Vertical interference appears in the projected imagesProblems when projection starts Power does not turn onProblems with the remote control Remote control does not workSpecifications Appearance MaintenanceGlossary Maintenance CleaningCleaning the Projector Case Cleaning the LensCleaning the Air Filter Turn off the power, wait for the coolRemoving the Air Filter Down period to end takesLamp Replacement Period Install the air filterInstall the air filter cover LAMP/COVER indicator flashes orange or lights redReplacing the Lamp Install the new lamp Install the lamp cover, then tightenLoosen the screws fixing the lamp Remove the old lamp Securely tighten the lamp fixing screwsReset the lamp operating time Resetting the Lamp Operating TimeExample While checking the tone adjustment Screen, adjust the settings startingFrom the one where the vertical stripe Portions of the image, adjustOptional Accessories Lamp cartridgeCeiling mount bracket for low ceilings Ceiling mount bracket for high ceilingsList of Supported Signal Resolutions Component Video/RGB VideoAnalog-RGB signals/signals input to the Hdmi port Specifications Center of lens = Default lens shift position AppearancePart Names and Functions LAMP/COVER indicator p.42 Indicator p.6, 7Setting button p.11, 16 TEMP/FAN indicator p.42D4 Video port Setup Guide Input A/INPUT B ports Setup GuideHdmi port Setup Guide Video port Setup GuideIndicator Light switch Setup GuideZoom button p.11 Iris button p.17Glossary ComponentGlossary SyncPage 2004 Before Using the Remote Control Screen Size and Setting-up Distance Setting-up MethodsInserting the batteries and replacement period Battery Replacement PeriodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Incorrect CorrectFalsch RichtigIncorrecto Correcto

LPX-510 specifications

The Yamaha LPX-510 is a cutting-edge digital piano that combines traditional craftsmanship with modern technology to provide an unparalleled musical experience. Designed for both beginners and experienced musicians, the LPX-510 boasts features that cater to a wide range of playing styles.

One of the standout features of the LPX-510 is its Graded Hammer Standard (GHS) action. This technology simulates the feel of an acoustic piano by offering heavier resistance in the lower keys and lighter resistance in the upper keys. The result is a more authentic playing experience, allowing musicians to express themselves more fully. Additionally, the keys are touch-sensitive, enabling dynamic control over the sound based on how hard or soft the keys are played.

Sound quality is another hallmark of the LPX-510. Equipped with advanced sampling technology, this digital piano features a range of high-quality instrument sounds, including grand pianos, electric pianos, organs, and string instruments. The AWM Stereo Sampling technique captures the nuances of each instrument, ensuring that the sound produced is rich and realistic. The LPX-510 also comes with a variety of built-in effects, such as reverb and chorus, providing further customization to the sound.

The LPX-510 is designed with versatility in mind. It includes multiple connectivity options, including USB to host, allowing for easy integration with computers and music production software. The MIDI capability enables musicians to connect the piano to external devices, enhancing its functionality for composition and recording. Additionally, Bluetooth connectivity allows for wireless communication with smart devices, making it simple to explore various applications for practice and learning.

Another key characteristic of the LPX-510 is its compact design. With its sleek, modern aesthetic, this digital piano fits seamlessly into any home or studio setting. The user-friendly interface, complete with an intuitive control panel, ensures that players can easily navigate through its various features and settings without confusion.

The Yamaha LPX-510 also places a strong emphasis on educational tools. It offers a range of practice features, including a song recording function and a built-in metronome, helping musicians refine their skills. Furthermore, the digital piano is compatible with Yamaha's Chord Track app, which allows players to learn popular songs and practice chord progressions in a fun and engaging way.

In conclusion, the Yamaha LPX-510 is a remarkable digital piano that excels in sound quality, playability, and connectivity. Whether for practice, performance, or composition, it offers an exceptional platform for musicians of all levels to unleash their creativity. With its combination of advanced technologies and thoughtful design, the LPX-510 stands as a versatile instrument that enriches the musical journey of every player.
Top Page Image Contents