Yamaha LPX-510 owner manual User’s Logo, On-Screen Display

Page 39

Using the Menu Functions

User’s Logo

You can record your favorite image as a user's logo.

A user's logo can be stored for projecting when the projector starts up and when projecting the hide screen.

When a user's logo is recorded, the previous user's logo will be erased. Follow the instructions on the screen

to record a user ’s logo. (Default setting: )

Selection frame

 

 

 

 

 

 

[User 's Logo]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set the zoom rate

 

 

 

 

 

 

 

 

 

 

 

Zoom rate

 

 

 

 

 

Record

 

 

 

 

 

 

 

100%

 

 

 

 

 

 

 

 

 

 

 

 

200%

 

 

 

 

 

 

 

 

 

 

 

 

300%

 

 

 

 

 

ESC :Return :Select :Setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move the selection frame so that

 

 

 

 

 

 

 

the area of the image to be

ESC :Return :Select

:Execute

 

 

 

 

 

 

 

 

 

 

recorded is inside the frame.

Select the display ratio.

•The image will be displayed in dot format while the selection frame is displayed, therefore the display size may change.

•The size of the recorded image is 480 ⋅ 360 dots.

•Once a user's logo has been recorded, you cannot return the logo to the default setting.

•To use the stored user's logo, set "Hide Screen" to "Logo".

On-Screen Display

Main menu

 

 

Function

 

 

 

 

Default

 

 

 

 

 

 

setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Position

If using the projector's control panel, press the

,

,

− and

buttons to set the

Center

 

menu display position. If using the remote control, tilt the

button horizontally and

 

 

vertically.

 

 

 

 

 

 

 

 

 

 

Navigation Bar

This sets the menu navigation bar to be displayed (ON) or not displayed (OFF).

ON

 

 

 

Menu Color

This selects the color of the main menu for full menus and the navigation bar to one of 4

Color 1

 

choices.

 

 

 

 

 

 

 

 

 

 

Message

This sets whether the following message is displayed (ON) or not displayed (OFF).

ON

 

• Command name display when image signal, picture mode, aspect, test pattern or

 

 

memory settings are retrieved.

 

 

 

 

 

 

 

 

• Messages such as when no image signals are being input, when an incompatible signal

 

 

is input, and when the internal temperature rises

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hide Screen

This sets the screen status when the

HIDE

button on the remote control is pressed. The

Black

 

 

screen status can be selected from "Black", "Blue" or "Logo".

 

 

 

 

 

Startup screen

This sets whether a startup screen (an image that is projected when projection starts) is to

ON

 

be displayed (ON) or not displayed (OFF). When this setting is changed, turn off the

 

 

power, and when the cool-down period has finished, turn the power back on again. The

 

 

new setting will be applied after the power turns back on.

 

 

 

 

 

 

 

 

 

 

 

 

Advanced Operations

35

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LPX-510 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customersFor U.K. customers InstallationOperation OthersIndications Alleen voor klanten in NederlandContents Remove the batteries from the remote control before storage Attach the lens cap to the lens Retract the adjustable footDo not touch the lens with bare hands Check the included accessories AccessoriesEquipped with a wide- angle lens shift function Features of the ProjectorTurning Off the Projector Turning On the ProjectorComponents connected to Connecting the Power CordCheck that the power is turned off for all Turning On the ProjectorTurning On the Projector Turning On the Power and Projecting ImagesTurn on the power for all equipment Connected to the projectorNEC Cord plug from the wall outlet If not using the projector for longTurning Off the Projector ProjectorEquipment ExtendedAttach the lens cap Disconnect the cords that areExit adjustment mode Adjusting the Screen ImageAdjusting the Image Size Zoom adjustment Adjust the image sizeTurn the two lens shift dials to adjust Projection image position adjustment Lens shiftCorrecting Keystone Distortion Keystone Grayscale pattern Select a patternConfirm the pattern selection CrosshatchExit the pattern display Adjusting the Image Quality Focus adjustmentAdjust the focus Select a setting value Brightness adjustment Iris adjustmentSelect the picture mode Selecting the picture modeButton on the remote control Select the aspect modePress the Aspect button on Normal mode Squeeze modeZoom mode Smart Zoom mode Through modeSqueeze Through mode Advanced Operations Description of Functions Functions for Enhancing ProjectionAbs. Color Temp Absolute Color Temperature and Flesh Tone AdjustmentRGB adjustment Adjusting flesh tonesMenus p.28 Saving and Retrieving Image Quality Settings Memory SaveSettings that can be saved in memory Storing image quality settingsControl panel or the button on Retrieving Saved Image Quality SettingsLine menu Using the Menu FunctionsList of Menus Full menuAdvanced Operations Input A, B Component When computer signals are being input Image MenuPicture Quality Reset Color AdjustmentPicture Mode *1 Auto Setup *1 Signal Setup MenuVertical Size ScreenZoom Lock On-Screen Display User’s LogoInfo Menu Reset MenuDisplay the menu screen Using the MenusSelect a setting item in the sub-menu Displaying and Operating Full MenusChange the setting Displaying and Operating Line MenusExit the menu display Select an item to be set When Having Some Trouble TroubleshootingGuide When Having Some TroubleWhen Having Some Trouble When the Indicators Provide No Help Problems relating to imagesNo images appear Message No Signal. is displayed Message Not Supported. is displayedImages are fuzzy or out of focus Image is truncated large or small Interference or distortion appear in imagesVertical interference appears in the projected images Image colors are not rightImages appear dark Projection stops automaticallyRemote control does not work Problems when projection startsPower does not turn on Problems with the remote controlMaintenance Specifications AppearanceGlossary Cleaning the Lens MaintenanceCleaning Cleaning the Projector CaseDown period to end takes Cleaning the Air FilterTurn off the power, wait for the cool Removing the Air FilterLAMP/COVER indicator flashes orange or lights red Lamp Replacement PeriodInstall the air filter Install the air filter coverReplacing the Lamp Securely tighten the lamp fixing screws Install the new lampInstall the lamp cover, then tighten Loosen the screws fixing the lamp Remove the old lampResetting the Lamp Operating Time Reset the lamp operating timeExample Portions of the image, adjust While checking the tone adjustmentScreen, adjust the settings starting From the one where the vertical stripeCeiling mount bracket for high ceilings Optional AccessoriesLamp cartridge Ceiling mount bracket for low ceilingsComponent Video/RGB Video List of Supported Signal ResolutionsAnalog-RGB signals/signals input to the Hdmi port Specifications Appearance Center of lens = Default lens shift positionPart Names and Functions TEMP/FAN indicator p.42 LAMP/COVER indicator p.42Indicator p.6, 7 Setting button p.11, 16Video port Setup Guide D4 Video port Setup GuideInput A/INPUT B ports Setup Guide Hdmi port Setup GuideIris button p.17 IndicatorLight switch Setup Guide Zoom button p.11Component GlossarySync GlossaryPage 2004 Screen Size and Setting-up Distance Setting-up Methods Before Using the Remote ControlBattery Replacement Period Inserting the batteries and replacement periodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Richtig IncorrectCorrect FalschCorrecto Incorrecto
Top Page Image Contents