Yamaha LPX-510 owner manual Nec

Page 13

Turning On the Projector

•If only one signal source has been connected, the signals from that source will be

projected without needing to press one of the above buttons.

• If video signals are being input to several input ports simultaneously, interference between the various signals may occur, and this may cause interference in the projected images. If this happens, turn off the power supply or disconnect the video equipment which is not currently being used.

•If the "No Signal." message does not disappear, check the connections again.

No images will be projected during the time that it takes for signals to be input from the video source.

•If a laptop computer or a computer with an LCD screen has been connected to the projector, the images may not be projected straight away. After making the connections, check that the computer has been set up to output signals.

The following table shows examples of how to toggle output settings. For details, refer to the section of the documentation provided with your computer under a heading such as "External output", "Connecting an external monitor" or similar.

NEC	Panasonic	Toshiba	IBM	Sony	Fujitsu	Macintosh

						After startup, change the
[Fn]+[F3]	[Fn]+[F3]	[Fn]+[F5]	[Fn]+[F7]	[Fn]+[F7]	[Fn]+[F10]	Control Panel adjustments
						so that Mirroring is active.

8

Image 13

Contents LPX-510 Important Safety Instructions We Want You Listening For a Lifetime FCC Information for US customersOperation InstallationOthers For U.K. customersIndications Alleen voor klanten in NederlandContents Attach the lens cap to the lens Retract the adjustable foot Remove the batteries from the remote control before storageDo not touch the lens with bare hands Check the included accessories AccessoriesEquipped with a wide- angle lens shift function Features of the Projector Turning Off the Projector Turning On the ProjectorCheck that the power is turned off for all Connecting the Power CordTurning On the Projector Components connected toTurn on the power for all equipment Turning On the Power and Projecting ImagesConnected to the projector Turning On the ProjectorNEC Turning Off the Projector If not using the projector for longProjector Cord plug from the wall outletAttach the lens cap ExtendedDisconnect the cords that are EquipmentAdjusting the Image Size Zoom adjustment Adjusting the Screen ImageAdjust the image size Exit adjustment modeTurn the two lens shift dials to adjust Projection image position adjustment Lens shiftCorrecting Keystone Distortion Keystone Confirm the pattern selection Select a patternCrosshatch Grayscale patternExit the pattern display Focus adjustment Adjusting the Image QualityAdjust the focus Select a setting value Brightness adjustment Iris adjustmentSelect the picture mode Selecting the picture modeSelect the aspect mode Button on the remote controlPress the Aspect button on Squeeze mode Normal modeZoom mode Through mode Smart Zoom modeSqueeze Through mode Advanced Operations Description of Functions Functions for Enhancing ProjectionRGB adjustment Absolute Color Temperature and Flesh Tone AdjustmentAdjusting flesh tones Abs. Color TempSettings that can be saved in memory Saving and Retrieving Image Quality Settings Memory SaveStoring image quality settings Menus p.28Control panel or the button on Retrieving Saved Image Quality SettingsList of Menus Using the Menu FunctionsFull menu Line menuAdvanced Operations Image Menu Input A, B Component When computer signals are being inputPicture Quality Picture Mode *1 Color AdjustmentAuto Setup *1 ResetSignal Setup MenuVertical Size ScreenZoom Lock On-Screen Display User’s LogoInfo Menu Reset MenuSelect a setting item in the sub-menu Using the MenusDisplaying and Operating Full Menus Display the menu screenDisplaying and Operating Line Menus Change the settingExit the menu display Select an item to be set When Having Some Trouble TroubleshootingGuide When Having Some TroubleWhen Having Some Trouble Problems relating to images When the Indicators Provide No HelpNo images appear Message Not Supported. is displayed Message No Signal. is displayedImages are fuzzy or out of focus Image is truncated large or small Interference or distortion appear in imagesImages appear dark Image colors are not rightProjection stops automatically Vertical interference appears in the projected imagesPower does not turn on Problems when projection startsProblems with the remote control Remote control does not workSpecifications Appearance MaintenanceGlossary Cleaning MaintenanceCleaning the Projector Case Cleaning the LensTurn off the power, wait for the cool Cleaning the Air FilterRemoving the Air Filter Down period to end takesInstall the air filter Lamp Replacement PeriodInstall the air filter cover LAMP/COVER indicator flashes orange or lights redReplacing the Lamp Install the lamp cover, then tighten Install the new lampLoosen the screws fixing the lamp Remove the old lamp Securely tighten the lamp fixing screwsResetting the Lamp Operating Time Reset the lamp operating timeExample Screen, adjust the settings starting While checking the tone adjustmentFrom the one where the vertical stripe Portions of the image, adjustLamp cartridge Optional AccessoriesCeiling mount bracket for low ceilings Ceiling mount bracket for high ceilingsComponent Video/RGB Video List of Supported Signal ResolutionsAnalog-RGB signals/signals input to the Hdmi port Specifications Appearance Center of lens = Default lens shift positionPart Names and Functions Indicator p.6, 7 LAMP/COVER indicator p.42Setting button p.11, 16 TEMP/FAN indicator p.42Input A/INPUT B ports Setup Guide D4 Video port Setup GuideHdmi port Setup Guide Video port Setup GuideLight switch Setup Guide IndicatorZoom button p.11 Iris button p.17Component GlossarySync GlossaryPage 2004 Screen Size and Setting-up Distance Setting-up Methods Before Using the Remote ControlBattery Replacement Period Inserting the batteries and replacement periodUsing the remote control and remote operating range Screen Size and Setting-up Distance Setting-up Methods Connecting to a home theater system Connecting to a Computer Computer Correct IncorrectFalsch RichtigCorrecto Incorrecto