2 Installing the Software
2 Installing the Software
The DTU3005 Editor software can be installed from the DOS prompt onto a PC running Microsoft® Win- dows version 3.1, 95, or 98. The PC processor must be less than 300 MHz (or have a utility program installed to slow down the processor speed) for the Editor soft- ware to work properly.
Note: The DTU3005 Editor software does not work in a Windows NT environment.
If you are running Windows 3.1, double click the MS- DOS Prompt icon in the Main window of Program Manager. For Windows 95/98, select
3.The program asks on which drive you want to install the Editor software. For most computers, this will be drive C. Type c and press Enter.
4.The installation program then asks to which sub- directory you want to install the DTU3005 Editor software. This is where the program and configu- ration files will be placed. The suggested direc- tory name is DTU3005B. Type the directory name at the prompt and press Enter.
5.You will now verify your drive and directory choices. The installation program repeats your entries and asks if the information is correct. Enter Y if it is correct, and N if it is incorrect or you have changed your mind. Then press Enter.
insert the installation diskette into your computer and follow the steps listed below. The computer screen, showing the computer prompts and user responses, is shown below.
1.Change the current drive at the DOS prompt to the diskette drive. Type A: (or B: if that is your 3½" diskette drive), and then press Enter.
2.At the A:\> prompt, type install, and then press Enter. The installation prompts you to select which Editor software to install, as shown in the example screen below. Type 1 and press Enter to install the SEAbus Device Editor, or type 2 and press Enter to install the VDEW Device Editor.
6.The installation program copies and unpacks the editor program files onto your hard drive and
6 | Siemens Energy & Automation, Inc. |