Siemens DTU3005-B manual Starting the Software, Menu Navigation

Page 12

3 Starting the Software

3 Starting the Software

To start the DTU3005 Editor software, follow these steps:

1.If you are running Windows 3.1, double click the MS-DOS Prompt icon in the Main window of Pro- gram Manager. For Windows 95/98, select MS- DOS Prompt from the Start menu.

2.At the DOS prompt, which is usually C:\> (or C:\WINDOWS> if you are running a DOS prompt from Windows) type CD \DTU3005B, where

3.1Menu Navigation

Navigation of the program menus and dialog boxes can be performed with either the keyboard or a mouse. The Editor software uses the standard menu and dialog box user interface used by many other DOS and Windows programs. The mouse can be used to make menu selections, highlight and select items in a dialog box, and perform commands by clicking on dialog box buttons. Keyboard equivalents to mouse actions are described in Table 3.1 below. Informational messages are displayed on the bottom line of the screen to give you help with keyboard navigation.

Note: To use a mouse in DOS, be sure the mouse driver is loaded before starting the Editor software. This is usually done automatically from a command in the CONFIG.SYS or AUTOEXEC.BAT startup files, or if you are running the program from Windows, by Windows itself. For information on how to

DTU3005B is the directory where the Editor soft- ware is installed. Press Enter.

3.At the new DOS prompt (which is C:\DTU3005B> if you installed the program to the suggested directory), type DTU3005 and then press Enter.

4.The DTU3005 Editor software starts. An informa- tion screen appears as shown below.

5.Press Enter or Esc to close this information screen and start using the program.

load a mouse driver, refer to the instruc- tions included with your mouse.

Table 3.1 Keyboard Shortcuts for Menu Navigation

Key

Description

 

 

Arrow keys

Moves the highlight in the direction of

 

the arrow.

 

 

Enter

Performs the highlighted command.

 

 

Esc

Cancels a function, closes the menu or

 

dialog box, and returns you to the previ-

 

ous menu or dialog box.

 

 

Tab and

The Tab key moves forward one item at

Shift+Tab

a time within a dialog box. Shift+Tab

 

moves backward one item at a time.

 

 

Letter keys

The colored letter in each menu item

 

indicates which key performs that com-

 

mand.

 

 

Spacebar

Selects or deselects a highlighted item.

 

 

Alt + Q

Quits the program.

 

 

8

Siemens Energy & Automation, Inc.

Image 12
Contents DTU3005-B Qualified Personnel Table of Contents Diagnostic Data Format Warranty134 135Features IntroductionProduct Overview Software OverviewPLC to SEAbus PLC to SEAbus Application Supported PLC WinPMModbus Master to SEAbus Modbus Master to SEAbusConnection to Modbus Master using a Multidrop Cable Multi-Drop Modbus Master to SEAbusSEAbus Port Expander SEAbus Port Expander Siemens Energy & Automation, IncInstalling the Software Installing the SoftwareInstalling the Software Starting the Software Menu NavigationUsing the Project Menu Main MenuStarting a New Project Starting the Software Starting the Software Configuring the Project File Creating Project Files-PLC to DevicesApplication Description PLC Setup-Port Communications Settings Wire RS422 or RS485 CommunicationsPLC Protocol DTU AddressDevice Setup-Port Saving Port 1 Configuration InformationOther Configuration Information Response Time-OutPassthrough Setup-Port Saving Port 2 Configuration InformationSaving Port 3 Configuration Information Intermessage Time-OutDevice List Setup Adding a DeviceCreating Project Files-PLC to Devices Configuring Custom Device Registers Saving the Device List ConfigurationConfiguring Custom Registers for a Single Device Removing a DeviceCreating Project Files-PLC to Devices Configuring Default Custom Device Registers by Device Creating Project Files-PLC to Devices Device Text Setup 7SJ600 Only Description of Returned Trip Global Command Registers Device Diagnostic RegistersDevice Command Registers Saving the Project File Creating Project Files-Modbus Master to Devices Creating Project Files-Modbus Master to DevicesConfiguring the Project File Modbus Setup-Port RS-485 Connector two-wire Device Setup-Port Modbus/Passthrough Setup-Port Modbus MasterWith the 2-Wire RS422 or RS485 Communications Passthrough to Port 2 SEAbusDevice List Setup Creating Project Files-Modbus Master to Devices Configuring Custom Device Registers Creating Project Files-Modbus Master to Devices Configuring Default Custom Device Registers Creating Project Files-Modbus Master to Devices Device Text Setup 7SJ600 Only Value Inputs 2 Global Command Registers Device Command Registers Creating Project Files-SEAbus Port Expander Creating Project Files-SEAbus Port ExpanderMenu, and the Port 1 Passthrough configuration Communications Settings SEAbus Device Setup-Port Configuration InformationTransferring Project Files Transferring Project FilesPersonal Computer RS-232 Port Downloading Projects