LG Electronics 1302-REV00, MFL67652408 owner manual Wall

Page 11

INSTALLATION 11

14 Mark the end of Ez bracket rod on the wall.

(Mark the positions of the holes where the Ez brackets will be fixed.)

15 Remove the Laser Display set and Ez bracket from the table.

16 16 Position both holes of the fixed component against the marks on the wall and mark the positions where the anchors will be inserted.

Wall

Mark on wall

Mark on wall

Image 11
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption