LG Electronics 1302-REV00, MFL67652408 owner manual Otherwise, it may cause personal injury

Page 3

Safety Precautions

3

yyWhen drilling the holes in the wall, make sure you use a drill and a drill bit with the specified size of diameter. Ensure that you also follow the in- structions regarding the depth of the holes.

-Otherwise, the product may be installed improperly causing safety issues.

yyDo not clean the product with wet towels, and do not use a heater or humidifier underneath the product.

-Moisture permeating into the product, steam or heat may result in fire, electric shock or damage to the product.

yyKeep the product away from sprin-

klers, sensors, high-tension wires and power sources. Do not install the product in a location where vibrations or shock impacts are likely to occur.

yyWear working gloves when installing the product. Do not use bare hands.

-Otherwise, it may cause personal injury.

Image 3
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption