LG Electronics 1302-REV00, MFL67652408 owner manual Length a = Length B

Page 21

INSTALLATION 21

5.Adjust the top and bottom widths of the projection so they are equal

1 To narrow the top width of the projection and widen the bottom width

Turn the left and right control panels counterclockwise simultaneously.

A

B

* Length A = Length B

2 To widen the top width of the projection and narrow the bottom width

Turn the left and right control panels clockwise simultaneously.

A
B
* Length A = Length B	.
	.

Image 21

Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption