LG Electronics 1302-REV00, MFL67652408 owner manual Option

Page 23

INSTALLATION 23

7.When the projection is the same size as the screen, fine-tune the projection location using Edge Adj function

*Complete fine tuning by pressing the Edge Adj button on the remote control. (Press the MENU button on the remote control and select Edge Adj in OPTION.)

OPTION

		︿
•	Language
•	Caption	: Off
•	Pointer
•	Set ID	: 1
•	PJT Mode	: Front
•	Edge Adj
•	Blank Image	: Blue

?﹀

Image 23

Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption