LG Electronics MFL67652408, 1302-REV00 owner manual Safety Precautions

Page 2

2Safety Precautions

Safety Precautions

Please take note of the safety instructions to prevent any potential accident or misuse of the product.

yySafety precautions are given in two forms, i.e. Warning and Caution as detailed be- low.

WARNING: Failure to follow the instructions may cause serious injury and even death.

CAUTION: Failure to follow the instructions may cause minor injury or damage to the product.

yyRead the owner's manual carefully and keep it to hand.

Installation

WARNING

yyThe product should be installed by a qualified professional specified by the retail store.

- The product installation by a non- qualified personnel is dangerous and may cause personal injury.

yyThe product should be installed where its weight can be supported.

-Otherwise, the product may fall and cause personal injury.

yyWhen moving or replacing the prod- uct after installation, contact a quali- fied installer specified by the retail store.

-If an unqualified person moves and installs the product, this may cause safety issues as this task requires the special technique.

yyDo not hang on the product or apply shock to the product.

-The product may fall and cause injury.

CAUTION

yyFollow the instructions in the manual to install the product.

-Otherwise, it may cause serious injury or damage to the product.

yyWhen installing the product or ad- justing the height of the product, two or more people are needed.

-If you do it by yourself, you may drop the product causing personal injury or damage to the product.

yyWhen installing the product, check whether the wall is strong enough to hold the product and use the an- chors and screws provided.

-Otherwise, they may not bear the weight of the product causing safety issues.

Image 2
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Accessories PreparationsInstallation How to fix anchors and screwsInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen is not parallel to the wall If the screen does not stay levelInstallation Ez Bracket Adjustment Guide 1. Reset projection Adjust the projection to fit within the screenLength a = Length B To turn the projection clockwise Length a = Length B If the projection is rectangle-shaped Enlarge the projection to fit the screen sizeOption