LG Electronics 1302-REV00, MFL67652408 owner manual Length a = Length B

Page 19

INSTALLATION 19

Insert the hex wrench into the hole as illustrated (left) and turn it clockwise to move the pro- jection to the right.

CAUTION

yyIf you are using a paper screen, align the paper screen with the projection and reattach it to the wall rather than moving the projection to the left or right.

3.Adjust the left and right widths of the projection so they are equal

1 To widen the left width of the projection and narrow the right width

Insert the hex wrench into the hole as illustrated (left) and turn it clockwise.

B

A

* Length A = Length B

2 To widen the left width of the projection and narrow the right width

Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise.

B

A

* Length A = Length B

Image 19
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption