LG Electronics 1302-REV00, MFL67652408 owner manual Installation

Page 7

INSTALLATION 7

3 If the Ez bracket does not stay level, attach a rubber to the bottom of the bracket to make it level.

(If you cannot make it level using a rubber, remove or add a plate. To add a plate, make sure to use screws that came with the product.)

NOTE

yyIf you cannot make it level by attaching a rubber, remove or add a plate. (To add a plate, make sure to use screws that came with the product.)

4 Place the Laser Display onto the Ez bracket by aligning the guide pins and the holes on the adjustable bracket.

Image 7
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Preparations AccessoriesHow to fix anchors and screws InstallationInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen does not stay level If the screen is not parallel to the wallInstallation Adjust the projection to fit within the screen Ez Bracket Adjustment Guide 1. Reset projectionLength a = Length B To turn the projection clockwise Length a = Length B Enlarge the projection to fit the screen size If the projection is rectangle-shapedOption