LG Electronics MFL67652408, 1302-REV00 owner manual To turn the projection clockwise

Page 20

20INSTALLATION

4.Adjust the horizontal line of the projection to be parallel with the width of the screen

1 To turn the projection clockwise

Turn the left control panel counterclockwise and turn the right control panel clockwise.

2 To widen the left width of the projection and narrow the right width

Turn the left control panel counterclockwise and turn the right control panel clockwise.

NOTE

yyIn this case, go back to Step 3 to adjust the widths so they are equal. In this case, go back to Step 3 to adjust the widths so they are equal. In this case, go back to Step 3 to adjust the widths so they are equal.

Image 20
Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Accessories PreparationsInstallation How to fix anchors and screwsInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen is not parallel to the wall If the screen does not stay levelInstallation Ez Bracket Adjustment Guide 1. Reset projection Adjust the projection to fit within the screenLength a = Length B To turn the projection clockwise Length a = Length B If the projection is rectangle-shaped Enlarge the projection to fit the screen sizeOption