LG Electronics MFL67652408, 1302-REV00 owner manual Installation Procedure Stand Type

Page 6

6INSTALLATION

Installation Procedure (Stand Type)

1 Install the guide pins at the bottom of the set.

2 Connect the connection rod to the Ez bracket main unit and place it on a table, without the fixed components, at the center of the screen.

NOTE

yyDo not assemble the fixed components to the unit yet.

Image 6

Contents Laser Display install guide Safety Precautions Otherwise, it may cause personal injury Accessories PreparationsInstallation How to fix anchors and screwsInstallation Procedure Stand Type Installation Center line Paper screen 10 mm Installation Wall Installation Magnet Installation Left side Right side If the screen is not parallel to the wall If the screen does not stay levelInstallation Ez Bracket Adjustment Guide 1. Reset projection Adjust the projection to fit within the screenLength a = Length B To turn the projection clockwise Length a = Length B If the projection is rectangle-shaped Enlarge the projection to fit the screen sizeOption