BenQ MP525 ST, MP515 ST user manual Connection

Page 18

Connection

When connecting a signal source to the projector, be sure to:

1.Turn all equipment off before making any connections.

2.Use the correct signal cables for each source.

3.Ensure the cables are firmly inserted.

• In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores.

For detailed connection methods, see pages 19-22.

Monitor

Notebook or desktop

A/V device

computer

 

 

(VGA)

(DVI)

 

 

 

 

 

1 or 2

1

4

3

4

7

5 6

1.

VGA cable

5.

S-Video cable

2.

VGA to DVI-A cable

6.

Video cable

3.

Component Video to VGA (D-

7.

Audio L/R cable

 

Sub) adapter cable

 

 

4.

HDMI cable

 

 

 

 

 

 

18 Connection

Image 18
Contents Welcome Table of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorMode Selects an available picture setupMode/Enter Activates the selected On-Screen Display OSD menu itemFreeze Remote controlVolume + Digital Zoom +Timer On Up/Down Remote control effective rangeReplacing the remote control battery Timer Set upFront Table Positioning your projectorChoosing a location Front CeilingAspect image in a Aspect display area Select your screen sizePositioning your projector Projection dimensions InchConnection Connecting a computer or monitor Connecting a computerTo connect the projector to a notebook or desktop computer Connecting Video source devices Connecting audioTo connect the projector to an Hdmi device Connecting a Component Video source deviceConnecting an Hdmi device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorBeen applied Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Using the OSD menu Fine-tuning the image size and clarityUsing the remote control Correcting keystonePress / to select a Using the menusUse / to highlight the System Setup Basic menu Preferred languageSetting a password Using a security cable lockUtilizing the password function To the Security SettingsEntering the password recall procedure If you forget the passwordChanging the password Write down the number and turn off your projectorDisabling the password function Switching input signal Changing Color SpaceColor space Magnifying and searching for details Selecting the aspect ratioPress Digital Zoom+/- to display the Zoom bar About the aspect ratio Using Wall Color Selecting a picture modeOptimizing the image Go to the Picture Picture Mode menu Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Adjusting BrightnessAdjusting Sharpness Adjusting ColorAdjusting Tint Adjusting Brilliant ColorTo adjust the settings Setting the presentation timer To cancel the timer, perform the following stepsTo highlight Off and press Mode/Enter How to use the Timer On key? Hiding the imageUtilizing FAQ function Freezing the imagePress Mode/Enter Locking control keys To activate the High Altitude ModeOperating in a high altitude environment Highlight Yes and press Mode/Enter to confirmTurning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Personalizing the projector menu displayOnce the cooling process finishes, a Power Off Ring Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Informa Description of each menu Timer TemperatureSave Settings ColorAuto Power Off System Setup Basic menuMenu Settings Blank TimerChange Password Lamp ModeLamp Settings Reset Lamp Timer Settings On page 27 for details Power On LockSettings Signal carries closed captionsReset All Returns all settings to the factory preset values FAQ-Image InstallationMaintenance Care of the projectorGetting to know the lamp hour Setting Lamp Mode as EconomicLamp information Extending lamp lifeTiming of replacing the lamp Lamp has been in operation equivalent to HoursReplacing the lamp Page Tighten the screw that secures the lamp Resetting the lamp timerLamp time will be reset to Restart the projectorLamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Dimensions Ceiling mount installationMm W x 114 mm H x 236 mm D Timing chart Supported timing for PC inputSupported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsLimited warranty CopyrightDisclaimer EEC statement Regulation statementsFCC statement Weee directiveRegulation statements
Related manuals
Manual 66 pages 8.62 Kb

MP515 ST, MP525 ST specifications

The BenQ MP525 ST and MP515 ST are innovative projectors designed to deliver high-quality visuals for both educational and business environments. With a blend of advanced technologies and user-friendly features, these projectors offer exceptional performance.

Starting with the core characteristics, both models boast DLP (Digital Light Processing) technology, which ensures sharp images with vibrant colors and excellent contrast ratios. The native resolution of these projectors is XGA (1024 x 768), suitable for detailed presentations and videos. The brightness level for the MP525 ST is typically around 2500 ANSI lumens, providing sufficient illumination for well-lit environments. The MP515 ST, while slightly less bright, still delivers adequate performance for dimly lit rooms, making both models versatile for various settings.

One of the standout features of the BenQ MP525 ST is its short-throw projection capability, allowing users to display large images from a short distance. This is particularly beneficial in smaller rooms where space is limited as it minimizes shadows and enables presenters to stay close to their audience. The throw ratio is approximately 0.6:1, meaning it can project a large image within just a few feet from the screen.

Both projectors come equipped with a comprehensive connectivity suite, including HDMI, VGA, S-Video, and composite video inputs, ensuring compatibility with a wide range of devices such as laptops, DVD players, and gaming consoles. They also feature built-in speakers that deliver clear audio without the need for external sound systems, making them convenient for quick setups.

In terms of usability, the BenQ MP525 ST and MP515 ST are designed with user-friendly interfaces and remote controls. They include features like keystone correction to help adjust the image shape, ensuring perfect alignment even when the projector is angled. Additionally, the projector’s lamp life is impressive, reaching up to 4000 hours in economic mode, which reduces the need for frequent replacements and lowers operational costs.

In conclusion, the BenQ MP525 ST and MP515 ST projectors are excellent choices for educators and presenters who require flexibility, quality, and ease of use in their projection equipment. With their advanced DLP technology, short-throw capabilities, and versatile connectivity options, these models cater to diverse presentation needs while ensuring that every image is displayed with clarity and impact.