BenQ MP525 ST, MP515 ST user manual Limited warranty, Copyright, Disclaimer

Page 64

Warranty and Copyright information

Limited warranty

BenQ warrants this product against any defects in material and workmanship, under normal usage and storage.

Proof of purchase date will be required with any warranty claim. In the event this product is found to be defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any defects.

Important: The above warranty shall be void if the customer fails to operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be in-between 10% and 90%, temperature in-between 0°C and 35°C, altitude lower than 4920 feet, and avoiding to operate the projector in a dusty environment. This warranty gives you specific legal rights, and you may have other rights which vary from country to country.

For other information, please visit www.BenQ.com.

Copyright

Copyright 2009 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.

*DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments. Others are copyrights of their respective companies or organizations.

64 Warranty and Copyright information

Image 64
Contents Welcome Table of contents Safety Instructions Important safety instructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorSelects an available picture setup Mode/EnterMode Activates the selected On-Screen Display OSD menu itemRemote control Volume +Freeze Digital Zoom +Remote control effective range Replacing the remote control batteryTimer On Up/Down Timer Set upPositioning your projector Choosing a locationFront Table Front CeilingAspect image in a Aspect display area Select your screen sizePositioning your projector Projection dimensions InchConnection Connecting a computer Connecting a computer or monitorTo connect the projector to a notebook or desktop computer Connecting Video source devices Connecting audioConnecting a Component Video source device Connecting an Hdmi deviceTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceStarting up the projector OperationBeen applied Adjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarity Using the remote controlUsing the OSD menu Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuPress / to select a Preferred languageUsing a security cable lock Utilizing the password functionSetting a password To the Security SettingsIf you forget the password Changing the passwordEntering the password recall procedure Write down the number and turn off your projectorDisabling the password function Changing Color Space Switching input signalColor space Selecting the aspect ratio Magnifying and searching for detailsPress Digital Zoom+/- to display the Zoom bar About the aspect ratio Selecting a picture mode Using Wall ColorOptimizing the image Fine-tuning the image quality in user modes Setting the User 1/User 2 modeGo to the Picture Picture Mode menu Adjusting BrightnessAdjusting Color Adjusting TintAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings To cancel the timer, perform the following steps Setting the presentation timerTo highlight Off and press Mode/Enter How to use the Timer On key? Hiding the imageFreezing the image Utilizing FAQ functionPress Mode/Enter To activate the High Altitude Mode Operating in a high altitude environmentLocking control keys Highlight Yes and press Mode/Enter to confirmAdjusting the sound Adjusting the sound levelTurning off the Power On/Off Ring Tone Personalizing the projector menu displayOnce the cooling process finishes, a Power Off Ring Shutting down the projectorMenu operation Menu systemMain menu Sub-menu Options BasicAdvanced Informa Description of each menu Temperature Save SettingsTimer ColorSystem Setup Basic menu Menu SettingsAuto Power Off Blank TimerLamp Mode Lamp Settings Reset Lamp TimerChange Password Settings On page 27 for details Power On LockSignal carries closed captions Reset All Returns all settings to the factory preset valuesSettings FAQ-Image InstallationMaintenance Care of the projectorSetting Lamp Mode as Economic Lamp informationGetting to know the lamp hour Extending lamp lifeTiming of replacing the lamp Lamp has been in operation equivalent to HoursReplacing the lamp Page Resetting the lamp timer Lamp time will be reset toTighten the screw that secures the lamp Restart the projectorIndicators Light Status & Description Power eventsLamp events Thermal eventsTroubleshooting Specifications Ceiling mount installation DimensionsMm W x 114 mm H x 236 mm D Timing chart Supported timing for PC inputSupported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright Limited warrantyDisclaimer Regulation statements FCC statementEEC statement Weee directiveRegulation statements
Related manuals
Manual 66 pages 8.62 Kb

MP515 ST, MP525 ST specifications

The BenQ MP525 ST and MP515 ST are innovative projectors designed to deliver high-quality visuals for both educational and business environments. With a blend of advanced technologies and user-friendly features, these projectors offer exceptional performance.

Starting with the core characteristics, both models boast DLP (Digital Light Processing) technology, which ensures sharp images with vibrant colors and excellent contrast ratios. The native resolution of these projectors is XGA (1024 x 768), suitable for detailed presentations and videos. The brightness level for the MP525 ST is typically around 2500 ANSI lumens, providing sufficient illumination for well-lit environments. The MP515 ST, while slightly less bright, still delivers adequate performance for dimly lit rooms, making both models versatile for various settings.

One of the standout features of the BenQ MP525 ST is its short-throw projection capability, allowing users to display large images from a short distance. This is particularly beneficial in smaller rooms where space is limited as it minimizes shadows and enables presenters to stay close to their audience. The throw ratio is approximately 0.6:1, meaning it can project a large image within just a few feet from the screen.

Both projectors come equipped with a comprehensive connectivity suite, including HDMI, VGA, S-Video, and composite video inputs, ensuring compatibility with a wide range of devices such as laptops, DVD players, and gaming consoles. They also feature built-in speakers that deliver clear audio without the need for external sound systems, making them convenient for quick setups.

In terms of usability, the BenQ MP525 ST and MP515 ST are designed with user-friendly interfaces and remote controls. They include features like keystone correction to help adjust the image shape, ensuring perfect alignment even when the projector is angled. Additionally, the projector’s lamp life is impressive, reaching up to 4000 hours in economic mode, which reduces the need for frequent replacements and lowers operational costs.

In conclusion, the BenQ MP525 ST and MP515 ST projectors are excellent choices for educators and presenters who require flexibility, quality, and ease of use in their projection equipment. With their advanced DLP technology, short-throw capabilities, and versatile connectivity options, these models cater to diverse presentation needs while ensuring that every image is displayed with clarity and impact.