BenQ MP515 ST Indicators, Light Status & Description Power events, Lamp events, Thermal events

Page 57

Indicators

Light

Status & Description

 

 

 

 

Power events

 

 

 

 

 

 

 

 

Orange

Off

Off

Stand-by mode.

 

 

 

 

 

Green

Off

Off

Powering up.

Flashing

 

 

 

 

Green

Off

Off

Normal operation.

 

 

 

 

 

 

 

• The projector needs 90 seconds to cool down as it

 

 

 

 

was abnormally shut down without the normal

 

 

 

 

cooling down process.

Orange

Off

Off

• The projector needs to cool for 90 seconds after the

Flashing

 

power is turned off.

 

 

 

 

 

 

• The projector has shut down automatically. If you try

 

 

 

 

to re-start the projector, it will shut down again.

 

 

 

 

Please contact your dealer for assistance.

 

 

 

 

 

 

 

 

 

Lamp events

 

 

 

 

Orange

Off

Red

The projector has shut down automatically. If you try to

re-start the projector, it will shut down again. Please

Flashing

 

 

contact your dealer for assistance.

 

 

 

 

 

 

 

 

Off

Off

Red

1.

The projector needs 90 seconds to cool down. Or

2.

Please contact your dealer for assistance.

 

 

 

 

 

 

 

 

Thermal events

Off

Red

Off

Off

Red

Red

Off

Red

Green

Off

Red

Orange

Red

Red

Red

Red

Red

Green

Red

Red

Orange

Green

Red

Red

Green

Red

Green

Green

Red

Orange

Orange

Red

Red

Orange

Red

Green

Orange

Red

Orange

Off

Green

Red

Off

Green

Green

The projector has shut down automatically. If you try to re-start the projector, it will shut down again. Please contact your dealer for assistance.

Maintenance 57

Image 57
Contents Welcome Table of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Safety Instructions Locations near fire alarms Installation Introduction Projector featuresShipping contents Projector exterior view Front/upper sideRear/lower side Projector Controls and functionsMode/Enter Selects an available picture setupMode Activates the selected On-Screen Display OSD menu itemVolume + Remote controlFreeze Digital Zoom +Replacing the remote control battery Remote control effective rangeTimer On Up/Down Timer Set upChoosing a location Positioning your projectorFront Table Front CeilingSelect your screen size Aspect image in a Aspect display areaPositioning your projector Inch Projection dimensionsConnection Connecting a computer or monitor Connecting a computerTo connect the projector to a notebook or desktop computer Connecting audio Connecting Video source devicesConnecting an Hdmi device Connecting a Component Video source deviceTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceTo connect the projector to an S-Video/Video source device Connecting an S-Video/composite Video source deviceOperation Starting up the projectorBeen applied Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Using the remote control Fine-tuning the image size and clarityUsing the OSD menu Correcting keystoneUse / to highlight the System Setup Basic menu Using the menusPress / to select a Preferred languageUtilizing the password function Using a security cable lockSetting a password To the Security SettingsChanging the password If you forget the passwordEntering the password recall procedure Write down the number and turn off your projectorDisabling the password function Switching input signal Changing Color SpaceColor space Magnifying and searching for details Selecting the aspect ratioPress Digital Zoom+/- to display the Zoom bar About the aspect ratio Using Wall Color Selecting a picture modeOptimizing the image Setting the User 1/User 2 mode Fine-tuning the image quality in user modesGo to the Picture Picture Mode menu Adjusting BrightnessAdjusting Tint Adjusting ColorAdjusting Sharpness Adjusting Brilliant ColorTo adjust the settings Setting the presentation timer To cancel the timer, perform the following stepsTo highlight Off and press Mode/Enter Hiding the image How to use the Timer On key?Utilizing FAQ function Freezing the imagePress Mode/Enter Operating in a high altitude environment To activate the High Altitude ModeLocking control keys Highlight Yes and press Mode/Enter to confirmAdjusting the sound level Adjusting the soundTurning off the Power On/Off Ring Tone Personalizing the projector menu displayShutting down the projector Once the cooling process finishes, a Power Off RingMenu system Menu operationMain menu Sub-menu Options BasicAdvanced Informa Description of each menu Save Settings TemperatureTimer ColorMenu Settings System Setup Basic menuAuto Power Off Blank TimerLamp Settings Reset Lamp Timer Lamp ModeChange Password Settings On page 27 for details Power On LockReset All Returns all settings to the factory preset values Signal carries closed captionsSettings FAQ-Image InstallationCare of the projector MaintenanceLamp information Setting Lamp Mode as EconomicGetting to know the lamp hour Extending lamp lifeLamp has been in operation equivalent to Hours Timing of replacing the lampReplacing the lamp Page Lamp time will be reset to Resetting the lamp timerTighten the screw that secures the lamp Restart the projectorLight Status & Description Power events IndicatorsLamp events Thermal eventsTroubleshooting Specifications Dimensions Ceiling mount installationMm W x 114 mm H x 236 mm D Supported timing for PC input Timing chartSupported timing for Hdmi Hdcp input Supported timing for Video and S-Video inputs Supported timing for Component-YPbPrinputLimited warranty CopyrightDisclaimer FCC statement Regulation statementsEEC statement Weee directiveRegulation statements
Related manuals
Manual 66 pages 8.62 Kb

MP515 ST, MP525 ST specifications

The BenQ MP525 ST and MP515 ST are innovative projectors designed to deliver high-quality visuals for both educational and business environments. With a blend of advanced technologies and user-friendly features, these projectors offer exceptional performance.

Starting with the core characteristics, both models boast DLP (Digital Light Processing) technology, which ensures sharp images with vibrant colors and excellent contrast ratios. The native resolution of these projectors is XGA (1024 x 768), suitable for detailed presentations and videos. The brightness level for the MP525 ST is typically around 2500 ANSI lumens, providing sufficient illumination for well-lit environments. The MP515 ST, while slightly less bright, still delivers adequate performance for dimly lit rooms, making both models versatile for various settings.

One of the standout features of the BenQ MP525 ST is its short-throw projection capability, allowing users to display large images from a short distance. This is particularly beneficial in smaller rooms where space is limited as it minimizes shadows and enables presenters to stay close to their audience. The throw ratio is approximately 0.6:1, meaning it can project a large image within just a few feet from the screen.

Both projectors come equipped with a comprehensive connectivity suite, including HDMI, VGA, S-Video, and composite video inputs, ensuring compatibility with a wide range of devices such as laptops, DVD players, and gaming consoles. They also feature built-in speakers that deliver clear audio without the need for external sound systems, making them convenient for quick setups.

In terms of usability, the BenQ MP525 ST and MP515 ST are designed with user-friendly interfaces and remote controls. They include features like keystone correction to help adjust the image shape, ensuring perfect alignment even when the projector is angled. Additionally, the projector’s lamp life is impressive, reaching up to 4000 hours in economic mode, which reduces the need for frequent replacements and lowers operational costs.

In conclusion, the BenQ MP525 ST and MP515 ST projectors are excellent choices for educators and presenters who require flexibility, quality, and ease of use in their projection equipment. With their advanced DLP technology, short-throw capabilities, and versatile connectivity options, these models cater to diverse presentation needs while ensuring that every image is displayed with clarity and impact.