Installation Setup
Changing the batteries
The expected life of the batteries is about approximatively 1000 charge and discharge cycles. When replacing the batteries, all batteries should be replaced at the same time.
CAUTION
Risk of explosion if the batteries are replaced by an incorrect type
Dispose of used batteries according to the instructions
To change the batteries follow next procedure:
1.Turn the remote off and remove all the cables
2.Turn the locking screw counterclockwise to free the metallic cover (Image 1)
3.Open the metallic cover (Image 2)
4.Remove the 6 batteries
5.Insert the new batteries correctly in the battery compartiment, be sure to install the batteries in the proper polarity and not to short battery terminals together.
6.Insure that switch A (Image 3) is in the 'CHARGE' position (left position)
7.Close the metallic cover
8.Turn the locking screw clockwise to lock the metallic cover
image 1 | image 2 | A | |
|
| ||
|
| ||
|
|
|
|
image 3
17