Menu Setup
Selecting the communication port
To enable one of the communication ports handle as follows:
| + |
|
1. Browse with | - | when in the 'Communication Menu'. |
2.Select 'comm.port' and confirm with <ENTER>.
3.Select with <ENTER> (Menu 1).
4.Exit the menu with <EXIT> or <ADJ>.
NO COMMUNICATION
COMMUNICATION
COM.PORT: [AUTO]
Menu 1
When selecting 'AUTO' following priority is set :
Auto enables the XLR port if it is powered.
if not, RF is enabled else RS232/422 is enabled (see flowchart 1)
XLR yes powered?
no
RF yes available?
no
RS232
Flowchart 1
XLR enabled
RF enabled
Changing the baudrate
1. | Browse with | + | when in the 'Communication Menu'. |
- | |||
2. | Select 'Baudrate' and Confirm with < ENTER>. | ||
3. Select one of the different baudrates with < ENTER> (Menu 1).
4. Exit the menu with <EXIT> or <ADJ>.
NO COMMUNICATION
COMMUNICATION
BAUDRATE [57600]
Menu 1
Remark: When XLR or RF are enabled, baudrate is fixed at 57600.
28