USER’S GUIDE
MANUAL FEED SLOT
The
When you use labels or transparencies, be sure to use this slot. For information on paper specifications, see “PAPER SPECIFICATIONS” in the previous section.
Load paper manually as follows:
1.Make sure that you have selected the manual paper feed, paper size and orientation in your software application.
✒Note
∙You may select manual paper feed, paper size, and orientation in your application software. If your application software does not allow these settings, you should make them by using the RPC program supplied with your printer.
∙If you do not select manual paper feed and insert a page in the manual feed slot, the printer loads the first page from the manual feed slot and loads the subsequent pages from the
∙If your application software does not support your custom paper size, select the next paper size up that is closest but larger than the custom size. Then adjust the print area by changing right and left margins in your application software.
2.Choose a print command to send a file or document to the printer. If the printer is in sleep mode, receiving data wakes it up.
A blinking MANUAL lamp alerts you to insert a sheet of paper into the manual paper feed slot.