Brother HL-600 manual Bits

USER’S GUIDE

Table 1: Serial Interface Parameters Settings

Selector	Parameters	On (up)			Off (down)
1	Baud Rate	—	See Table 2.	—
2	Baud Rate	—	See Table 2.	—
					8 bits
3	Data Length	7 bits
					1 bit
4	Stop Bit	2 bits
5	Parity	—	See Table 3.	—
6	Parity	—	See Table 3.	—
					DTR only
7	Protocol	Xon/Xoff + DTR
					Off
8	Robust Xon	On
Table 2: Baud Rate Settings
Selector 1	Selector 2	For RS-422A			For RS-232C
Off	Off		57600	9600
On	Off		9600	4800
Off	On		1200	1200
On	On		19200	19200
Table 3: Parity Settings
Selector 1	Selector 2	Parity
On	On	Odd
On	Off	Even
Off	—	None

☛Caution

∙The factory settings are indicated in bold.

∙If the robust Xon setting is turned on with selector 8, the printer sends Xon signals at one second intervals to the connected computer until it receives data. It is effective only if selector 7 is set to the On position for the Xon/Xoff plus DTR setting.

4–4