Brother HL-600 manual Switches, Select Reset Switch, Select Switch

CHAPTER 3 CONTROL PANEL

SWITCHES

This printer has the following control panel switches.

Fig. 3-2 Switches on Control Panel

✒Note

This printer has no power switch. You just plug the power cord into the AC outlet. The sleep mode feature handles all power control. For more information on sleep mode, see “OTHER CONTROL FEATURES” in this chapter.

SELECT (RESET) Switch

The lower switch on the control panel can work as the SELECT or

RESET switch.

SELECT Switch

The SELECT switch turns the printer on-line and off-line alternately. When the printer is on-line, the READY lamp is on. When the printer is off-line, the READY lamp is blinking respectively.

If you press the SELECT switch during printing, the printer immediately stops printing even if the printer has started to print. It ejects the page, and then enters the off-line status. Press the SELECT switch again and the printer will print the complete page again.

3–3