Using as a Fax
The following is a basic fax features. If you want to use
Sending a fax
1
2 Set the document(s) in ADF or FBS.
3 Adjust resolution and contrast, if necessary. Press RESOLUTION to change the resolution. Press CONTRAST to change the contrast.
4
5
6 Press START.
If you use FBS, press [Exit] after scanning is finished.
Important: If you want to cancel a transmission while scanning the docu- ment, press STOP.
If you want to cancel a transmission in progress, use the Review Commands function. See “Review Commands” next.
Getting started
Review Commands
The Review Commands function gives you the power to check on each job (or command) in your machine’s memory. It also lets you cancel a command if you decide not to send the document.
To cancel a command:
1 Press REVIEW COMMANDS.
2 Select the command you want to cancel by cursor key.
3 Press [Cancel].
Note: If you want to stop reviewing the stored commands, press RESET to return the machine to standby mode.
For more information on the Review Commands function, see page 2.11 in “Fax Reference”.
Receiving a fax
A received fax is printed automatically even when the machine is in Copy mode or Auto power off mode.
Your machine has five different reception modes — Tel Ready, Fax Ready, Fax/Tel Ready, Tel/Fax Ready and Ans/Fax Ready. Your machine is set to Fax Ready mode for default. If you want to change the reception mode, see pages
1.19