Just in case …
If a printout jams
If a printout jam occurred during printing, an alarm sounds and the part the paper jammed will blink on the LCD. Please remove the jammed paper carefully as below.
CAUTION: The fuser unit becomes very hot. Do not touch the fuser unit when you are removing a paper jam.
Electrical Contacts
Important: Do not touch the electrical contacts inside the printer cover and under the drum cartridge, as an electrostatic dis- charge may damage the machine.
Side cover
When the side cover part is blinking on LCD:
1 | Open the side cover and the clear |
| cover. |
2 Remove the jammed paper.
When using the optional Large capacity cassette:
Turn the green dial as the arrow indicates and remove the jammed paper.
3 Close the side cover.
4 Pull the cassette toward you and remove the papers in the cassette.
5 Reset the papers into the cassette and close the cassette.
2.2