Muratec MFX-2500 Safety information, Internal Laser Radiation, Laser Safety Label

Page 4

Safety information

Laser Safety

This is a digital machine which operates by means of a laser. There is no possibility of danger from the laser, provided the machine is operated according to the instruc- tions in this manual.

Since radiation emitted by the laser is completely confined within protective hous- ing, the laser beam cannot escape from the machine during any phase of user operation.

This machine is certified as a Class 1 laser product. This means the machine does not produce hazardous laser radiation.

Internal Laser Radiation

Maximum Average Radiant Power: 36.7 (µW) at the laser aperture of the print head unit.

Wavelength: 770-810 nm

This product employs a Class IIIb Laser Diode that emits an invisible laser beam.

The Laser Diode and Scanning Polygon Mirror are incorporated in the print head unit.

The print head unit is NOT A FIELD SERVICE ITEM.

Therefore, the print head unit should not be opened under any circumstances.

Laser Aperture of

the Print Head Unit

Print Head

This figure shows the view inside the Right Door with the Imaging Unit removed.

For the United States

CDRH regulation

This machine is certified as a Class 1 Laser product under the Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U. S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.

The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

CAUTION: Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation expo- sure.

This is a semiconductor laser. The maximum power of the laser diode is 5mW and the wavelength is 770-810nm.

Laser Safety Label

A laser safety label is attached to the outside of the machine as shown below.

ID Label

Laser safety label

 

IC Label

 

i

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Muratec MFX-2500 Welcome … Copyright TrademarksStatement Safety information Laser SafetyLaser Safety Label Internal Laser RadiationBefore using your Muratec machine Where to set up your machinePower requirements General PrecautionsDo not put furniture or equipment on the power cord Storing and handling toner bottlePick an installation spot Power tipsIntroduction Find your serial number and write it downSymbol and terms Operating tips About and symbolTable of Contents Getting started Packaging contents Parts of the machine19 20 21 22 Options Control panel Status lightsVates the call request feature Changing Fax/Copy mode Panel display Liquid Crystal DisplayCopy standby display Fax standby displayPower On AC power switchSleep mode Auto Power Off modeRecording paper size and capacity Loading paperLoading paper Loading the large capacity cassette Option Changing the paper sizeChanging the paper size of the multi purpose cassette Setting the paper type When using the special sized paperInstalling / changing the drum cartridge Installing / Changing the printing suppliesUnpacking Installing the toner bottle Page Using Code to enter characters Using one-touch keys to enter charactersEntering characters Language settings Enter UsingClearing stored settings Entering initial settingsEasyStart Getting startedEasyStart is complete How to set the document How to set the documentAcceptable document size Auto document size detectionUsing as a Fax Review CommandsPress Cancel Sending a faxUsing as a Copier Making copiesUsing as a Phone Machine setting Confirm the Counter for total printed pagesProtect passcode Copy protectSleep mode Auto power off modePaper jam alarm Printing of the machine setting listPaper size for list printing Bin tray OptionThis page intentionally blank Just in case … Clearing paper jams If an original document jamsTo remove the document To continue scanning from the jammed page, press YesIf a printout jams Side coverPrinter cover / Fuser cover Optional Bypass tray Optional duplex unitOptional 2-Bin tray or the optional shift tray Print quality problems Printouts have irregularities Printouts have white and/or black linesPrintouts have toner smudges Printouts have white spotsCleaning tips Corrective cleaningCaring for your machine Curing frequent jams in the ADFCleaning the FBS If you have unsatisfactory printout qualityEvent of a power failure Power failure reportPower failure during the machine is working During power failureThis page intentionally blank Appendix and index Specifications Main unitFax communication Option Index OptionsNo.1 Stoke Road Guildford, Surrey GU1 4HW

MFX-2500 specifications

The Muratec MFX-2500 is a multifunction printer designed to meet the demands of modern office environments. This all-in-one device combines advanced printing, scanning, copying, and faxing capabilities in one compact design, making it ideal for small to medium-sized businesses looking to streamline their workflow.

One of the standout features of the MFX-2500 is its high-speed printing capability, reaching up to 25 pages per minute. This ensures that users can quickly produce high-quality documents without unnecessary delays. The printer supports a variety of media types and sizes, including letterhead, envelopes, and labels, allowing for versatility in document creation.

The MFX-2500 also boasts impressive scanning capabilities. With a flatbed scanner and an automatic document feeder, users can easily scan multiple pages at once. The device supports both color and black-and-white scanning, with a maximum optical resolution of 600 x 600 dpi, ensuring that scanned documents maintain their quality and detail. Additionally, the inclusion of various file format options such as PDF, TIFF, and JPEG offers flexibility in document management.

In terms of connectivity, the Muratec MFX-2500 is equipped with USB, Ethernet, and wireless options, allowing for easy integration into any office network. Its compatibility with various operating systems, including Windows and macOS, means that users can easily connect the device to their computers, tablets, or smartphones.

The MFX-2500 features a user-friendly control panel with a color LCD display, enabling quick access to functions and settings. Customizable shortcuts streamline the process of making copies or scanning documents, enhancing productivity. Furthermore, the device supports duplex printing, which allows for automatic double-sided printing, helping to reduce paper consumption and promote sustainability in the workplace.

Another important characteristic of the MFX-2500 is its energy efficiency. With features like sleep mode and low power consumption, the device contributes to lower operational costs and environmental impact.

In conclusion, the Muratec MFX-2500 stands out in the market for its robust multifunction capabilities, high-speed performance, and advanced scanning and connectivity options. Whether for day-to-day printing needs or more complex document management tasks, the MFX-2500 is designed to optimize productivity and efficiency in any office setting.
Top Page Image Contents