Audiovox afx-35, VE-500 manual Assemblina & Connecting, Connecting the Power, Turning the Power on

Page 10

Assemblina & Connecting continued

Connecting the Power

Plug the power cord to the power receptacle. Plug the other end of the cord into a properly grounded, three-pin AC power outlet.

Note: Use an outlet not shared with equipment that generates electrical noise or consumes large amounts of electricity, such as an air conditioner or off ice copier.

Turning the Power “ON”

Press the Power switch to turn the unit on.

When you turn the power on, ‘SYSTEM INITIAL’ message appears briefly in the display window and all indicators light briefly. After a moment, all indicators are turned off, and the date, time are displayed. (If the displayed time and date are incorrect, don’t worry - you will change this information in a moment.). This confirms your unit works properly.

You may leave your unit on and standby mode 24 hours a day, 365 days a year.

Notes: If nothing appears in the window, make sure that:

•The power cord is properly connected and plugged into the wall jack.

•The wall jack is ‘live’ and not switched off by a wall switch or blown fuse.

Choosing Dial Mode

Set the DIAL Mode switch on the left side of the unit for the type of service you have (pulse or tone).

If you are not sure which type of service you have, do this simple test.

1.Lift the handset and listen for a dial tone.

2.Press any number other than 0. If the dial tone stops, you have a touch-tone service. Set the DIAL MODE switch to “TONE”

3.If the dial tone continues, set the DIAL MODE switch to “PULSE”.

9

Image 10

Contents Audiovox If a Problem Arises Type of ServiceTelephone Company Procedures Label IdentificationDOC Information Avis Renseianements du Minis&e des CommunicationsClasse B About This Guide ContentsCongratulations Side View Quick Look at Your MachineCheck your Equipment Quick Look at Your Machine Control PanelFollow These Steps Setting UpChoosing a Proper Location Connecting the Phone Line Assembling & ConnectingInstalling the Handset Attaching the Document TrayTurning the Power on Assemblina & ConnectingConnecting the Power Choosing Dial ModeSetting Speaker Volume Assembling & ConnectingSetting Ringer Volume Loading Fax Paper Paper Running OUTSetting Date and Time Setting Your Terminal IDSetting Up Basic Information How To Enter NameReceiving in Auto RCV Mode Choosing a ModeReceiving in TEL Mode ReceivingReceiving Receiving in ANS/FAX ModeReceiving in TEL/FAX Mode Machine and/or answering machine may not function properlyCanceling a Reception Receiving Using the Extension TelephoneReceiving Voice Request Window Messages Important Receiving FactsIdentifying the Party Sending Documents Important Receiving Facts Clearing Paper JamsSendina Sending a DocumentMemory Dialing Handset Up, Handset DownImportant Sending Facts Automatic RedialingClearing Document Jams Window MessagesPrinting Information on Sent Pages Voice Request Important Sendina FactsConfirmation Report Preparing a Good Original Setting the ResolutionControlling Transmission Quality & Document Size LimitationsEnter Storing One-Touch & Speed Dial NumbersOptional features of your unit. To review Settina User OptionsPrinting Reports Location Number ListTransmission Report Printing ReportsOptions List Reception ReportMaintenance and Troubleshooting Troubleshooting GuideMaintenance and Troubleshooting Cleaning ComponentsHow a Fax Works About Facsimile CompatibilitySpecifications When Service is Needed