Canon PC1270D manual FAX Settings

09_EN.fm Page 4 Tuesday, February 19, 2002 8:38 AM

FAX SETTINGS

	Name	Descriptions
USER SETTINGS		The basic operation settings in the Fax mode can be specified.
	1.TEL LINE SETTINGS	Specify the telephone line settings.
	1.USER TEL NO.	Your telephone and fax number can be registered. (→ p. 2-4)
	2.TEL LINE TYPE	Selects the telephone line type. (→ p. 2-7)
	TOUCH TONE	The telephone line is set for touch tone dialling.
	ROTARY PULSE	The telephone line is set for rotary pulse dialling.
	3.TX START SPEED	Sets the transmission speed for all documents you send.
		14400bps/9600bps/7200bps/4800bps/2400bps
	4.RX START SPEED	Sets the transmission speed for all documents you receive.
		14400bps/9600bps/7200bps/4800bps/2400bps
	2.UNIT NAME	You can register your name (or your company name). (→ p. 2-5)
	3.TX TERMINAL ID	Prints your ID (transmitting terminal ID) on each page you transmit.
		(→ p. 2-3)
	ON	After you turn the terminal ID ON, you can do the following settings.
	1.TTI POSITION	OUTSIDE IMAGE: Terminal ID is printed outside the image border.
		INSIDE IMAGE: Terminal ID is printed inside the image border.
	2.TEL NUMBER MARK	Selects the prefix for the identification header number.
		FAX, TEL
	OFF	No terminal ID is printed on the pages you send.
	4.DENSITY CONTROL	Sets the density of the documents.
	LIGHT	Sets for dark documents.
	STANDARD	Sets for the documents of normal density.
	DARK	Sets for light documents.
	5.PROG 1-TOUCH KEY	Programs a fax function into the One-Touch key. The programmed
		fax function will be executed by directly pressing the corresponding
		One-Touch key. You do not need to press Function before pressing
		the One-Touch key.
01 - 12		Select the One-Touch key (01 to 12) in which you want to program
		the fax function.
	USE	Uses PROGRAM 1-TOUCH KEY.
		The following functions can be programmed:
		1.REPORT;
		2.DELAYED TX;
		3.FAX MONITOR;
		4.MEMORY REFERENCE;
		5.BOOK SENDING.
		6.D.T.
	DO NOT USE	Disables PROGRAM 1-TOUCH KEY.

9-4