Linksys PAP2-VU Enter the IP, Address using, Numbers on, Invalid Option, if you try to set a, 130

Page 17

Phone Adapter with 2 Ports for Voice-over-IP

Interactive Voice Response Menu

Action	Command	Choices	Description
	(press these
	keys on the
	telephone)

Set Static IP Address	111	Enter the IP	To set a static IP address, the DHCP
		address using	feature must be disabled. If the DHCP
		numbers on the	feature is enabled, then you will hear,
		telephone keypad.	“Invalid Option,” if you try to set a
		Use the * (star) key	static IP address.
		when entering a
		decimal point.

Check Network Mask	120		You will hear the current network
(or Subnet Mask)			mask of the Phone Adapter.

Set Network Mask (or	121	Enter the network	To set the network mask, the DHCP
Subnet Mask)		mask using	feature must be disabled. If the DHCP
		numbers on the	feature is enabled, then you will hear,
		telephone keypad.	“Invalid Option,” if you try to set the
		Use the * (star) key	network mask.
		when entering a
		decimal point.

Check Static Gateway	130		You will hear the current gateway IP
IP Address			address of the Phone Adapter.

12			Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu
				Using the Interactive Voice Response Menu

Image 17

Contents Division of Cisco Systems, Inc Phone AdapterPage Copyright and Trademarks How to Use this GuideTable of Contents Front Panel Back PanelWhat’s in this Guide? IntroductionWelcome What’s in this Guide? Back Panel Ports Getting to Know the Phone AdapterPhone is being used or an incoming call has been detected Front PanelPhone Adapter’s LEDs are located on the front panel Instructions for Connecting the Phone Adapter Connecting the Phone AdapterOverview InternetConnect the Telephone Cable Stand Option Placement OptionsRemove the plate from the Phone Adapter’s bottom panel Phone Adapter’s Interactive Voice Response MenuMeasurement between Wall-Mount Slots Wall-Mount OptionUsing the Interactive Voice Response Menu Using the Phone Adapter’s Interactive Voice Response MenuAccessing the Interactive Voice Response Menu Interactive Voice Response Menu Use this command to enter Response MenuNot press any other keys until you Key or hang up to exit101 Enter 1 to enable Has been enabled or disabled. IfEnter 0 to disable Check Dhcp 100Static IP address When entering a Decimal point Address usingSubnet Mask Mask using Network mask When entering a Decimal pointStatic gateway IP address When entering a Decimal point Address Address usingPhone Adapter Manual Reboot 732668 131 Enter the IPConfiguring the Settings for Your Internet Phone Service Common Problems and Solutions Appendix a TroubleshootingAppendix a Troubleshooting Internet phone 5060 to Application Start and End Protocol IP Address EnableIP address Phone Adapter Internet phone 53 to IP address Phone Adapter Internet phone 69 toPhone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Application Start and End Protocol IP Address Enable Pick up the phone and dial as you normally would Frequently Asked QuestionsCan I make calls while I’m browsing the Internet? Network Neighborhood/My Network Places Appendix B Windows HelpShared Resources Appendix B Windows Help Appendix C Glossary Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Mm x 101 mm x 15 mm DimensionsStorage Humidity Limited Warranty Appendix E Warranty InformationAppendix E Warranty Information FCC Statement Appendix F Regulatory InformationAppendix F Regulatory Information Appendix G Contact Information Appendix G Contact Information